In a 3-phase induction motor, the mechanical power developed, in terms of air rotor input P2 is

Related MCQs

• A 3 phase induction motor is running with 4% slip. Its rotor input is 10kW then rotor copper losses are
• The input to a 3-ph induction motor is 50KW. The stator losses amount to 800W. The mechanical power developed (slip = 3%)
• A wound rotor induction motor can be distinguished from a squirrel cage induction motor by
• A6 pole 3 phase 50Hz induction motor develops mechanical power of 40Hp and has mechanical losses of 1500W at a speed of 960rpm when connected to 500V. The output available at the shaft is (Take 1HP=746W)
• A 440V, 20HP, 3phase motor operates at full load, 88% efficiency and 0.65 power factor lagging, the current drawn by motor is
• The speed of rotating field due to rotor currents relative to rotor surface in an induction motor is
• The rotor standstill resistance and reactance of an induction motor are 0.5Ω and 2.5Ω hence the rotor impedance at 5% slip is____.
• When an induction motor is running at full load, rotor reactance is ------rotor resistance
• A 3 phase indution motor is running with slip of 4% hving synchronous speed of 1500rpm. If rotor induced emf per phase in standstill condition is 115.47V and rotor impedance in standstill condition is 0.1+j1 Ω then torque developed ia____.
• The input to a 3-ph induction motor is 50KW. The stator losses amount to 800W. The rotor cu loss per phase is (slip = 3%)