The input to a 3-ph induction motor is 50KW. The stator losses amount to 800W. The mechanical power developed (slip = 3%)

Related MCQs

• The input to a 3-ph induction motor is 50KW. The stator losses amount to 800W. The rotor cu loss per phase is (slip = 3%)
• A6 pole 3 phase 50Hz induction motor develops mechanical power of 40Hp and has mechanical losses of 1500W at a speed of 960rpm when connected to 500V. The output available at the shaft is (Take 1HP=746W)
• An 8-pole , 50Hz,3-ph indduction motor running with a slip of 4% is taking 20KW. Stator losses amount 0.5KW. The total torque develped is
• A 3 phase induction motor is running with 4% slip. Its rotor input is 10kW then rotor copper losses are
• In a 3-phase induction motor, the mechanical power developed, in terms of air rotor input P2 is
• A 3 phase I.M. is running with slip 5%. Its air gap power is 12kW then total mechanical power developed is____.
• A 3-phase , 50 Hz , 4-pole squirrel cage induction motor has its stator rewound for 6 poles without any alternations in the rotor. The motor would now run at a speed
• There is no electrical connection between stator and rotor, still power is transffered from stator to rotor through
• A 4-pole, 3-phase induction motor is running at 4 percent slip at full load. If the speed of the motor is 720 rpm, the supply frequency is
• A 3 phase induction motor connected from a 3 pjhase, 50Hz AC supply runs at 720rpm and has slip 4%. The number of poles in motor are _____.