[Solved] Which is not a method of fuel injection in SI engine

McqMate

Q.	Which is not a method of fuel injection in SI engine
A.	directly into the cylinder before the end of compression stroke
B.	in to the inlet manifold during suction stroke
C.	near inlet port during suction stroke
D.	directly into the cylinder in high pressure injection system
Answer» A. directly into the cylinder before the end of compression stroke

1.1k

0

Do you find this helpful?

18

View all MCQs in

Applied Thermodynamics (AT)

Discussion

No comments yet

Related MCQs

Continuous port fuel injection refers to injection of fuel
In continuous inlet manifold injection system, the fuel is injected at a pressure of refers to injection of fuel
what would be the brake thermal efficiency of the engine, if the brake power of the engine is of 58.65KW, fuel consumption is 14kg/hr and the calrofic value of the fuel is 42500kj/kg
If a fuel for SI engine has high octane rating it shows that fuel has
an engine develops 100 Kw wihing the cylinder using fuel having calrofic value of 40000kj/kg with brake thermal efficiency 0.24 and mechanical efficiency 0.8. the fuel consumprion in kg/s…………….?
a six cylinder four stroke petrol engine develops a indicated power of 67.593 KW with indicated mean specific fuel consumption os 0.3kg/Kwh. What would be the mas flow rate of the fuel in kg/hr
what would be the air fuel ratio ot the engine if the air consumtion time for 0.1 cubic meter as 16.3 sec and whose density is 1.175kg per cubic meter and fuel consumtion time for 10 cc as 20.sec whos specific gravity is 0.7…….
what is the air fuel ratio of the engine, if the air consumtion I s0.00721 kg per second and fuel consumtion I s0.00035kg per se
GDI refers to injection of fuel
what would be the heat supplied to the engine in KJ/s, if the engine consumes 8 lit of gasoline per second. Take caloric value and specific gravity of fuel is 44000 kj/kg and 0.8 resp.