The check rails are placed opposite the crossing so that

Related MCQs

• If G is gauge distance and a is crossing, the distance between the nose of acute crossing and nose of obtuse crossing of a rail diamond, measured along the rail not forming the diamond, is
• To avoid the damage of nose of crossing, the wing rails are ramped so that nose of crossing remains at a lower level by
• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
• The distance between theoretical nose of crossing and actual nose of crossing for practical purposes, is
• If the standard length of a B.G. crossing is 597 cm, the number of crossing, is
• If the standard length of a crossing is 480 cm, the number of crossing is
• The spread between the point and splice rails at a distance of 4.25 m is 50 cm. The size of the crossing is
• If the stock rails are B.H. rails, the type of switch generally provided, is
• On a straight railway track, absolute levels at point A on two rails are 100.550 m and 100.530 m and the absolute levels at point B 100 m apart are 100.585 m and 100.515 m respectively, the value of twist of rails per metre run, is