In composite section deformation is same in both materials.

Related MCQs

• A composite section of R.C.C. column 300mm×300mm in section having 20mm diameter 4 bars, one at each corner. Strength of concrete is 5 N/mm2 and modular ratio Es/Ec=9. Calculate load taken by column.
• Deformation per unit length in the direction of force is known as
• The materials having same elastic properties in all directions are called
• The materials which have the same elastic properties in all directions are called __________
• Why is a composite beam is converted into a beam of one material
• In a composite beam bending, strain at the common interface will be
• During a tensile test on a specimen of 1 cm cross-section, maximum load observed was 8 tonnes and area of cross-section at neck was 0.5 cm2. Ultimate tensile strength of specimen is
• A 10 m long mild steel rail section is fixed at 300 K temperature. If temperature increases by 60 K, find stress in rail section if ends are not yielded. Coefficient of thermal expansion is 12×10-6/K.
• Euler's formula states that the buckling load P for a column of length l, both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are I and E respectively, is given by the relation
• Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose