A beam is said to be of uniform strength, if

Related MCQs

• A 10 m long cantilever beam is fixed at point B. What is the bending moment at point B, if 5 m span of AC carries uniform distributed load of 10 kN/m
• A uniformly distributed load of 20 kN/m acts on a simply supported beam of rectangular cross section of width 20 mm and depth 60 mm. What is the maximum bending stress acting on the beam of 5m?
• Why is a composite beam is converted into a beam of one material
• The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 kN/cm2, the permissible maximum crippling load will be
• Elongation of a bar of uniform cross section of length „L‟, due to its own weight „W‟ is given by
• During a tensile test on a specimen of 1 cm cross-section, maximum load observed was 8 tonnes and area of cross-section at neck was 0.5 cm2. Ultimate tensile strength of specimen is
• Tensile strength of a material is obtained by dividing the maximum load during the test by the
• A composite section of R.C.C. column 300mm×300mm in section having 20mm diameter 4 bars, one at each corner. Strength of concrete is 5 N/mm2 and modular ratio Es/Ec=9. Calculate load taken by column.
• A beam is a structural member which is subjected to
• A cantilever is a beam whose