What is the product of sectional modulus and allowable bending stress called as?

Related MCQs

• The modulus of rigidity and poisson‟s ratio of a material are 80 GPa and 0.3 respectively. Its young‟s modulus will be
• The Young‟s modulus of elasticity of a material is 2.5 times its modulus of rigidity. The Poisson‟s ratio for the material will be
• Young‟s modulus of a material which gives 2 kN/mm2 stress at 0.01 strain is
• A uniformly distributed load of 20 kN/m acts on a simply supported beam of rectangular cross section of width 20 mm and depth 60 mm. What is the maximum bending stress acting on the beam of 5m?
• The bending stress is
• The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known
• Euler's formula states that the buckling load P for a column of length l, both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are I and E respectively, is given by the relation
• The ultimate shear stress of a mild steel plate of 10 mm thickness is 350 N/mm2. Calculate the diameter of the hole that can be punched to it without exceeding a compressive stress of 700 N/mm2.
• An axial pull of 50 KN is suddenly applied to a steel bar 2 m long and 1000 mm2 in cross-section. If modulus of elasticity is 200 GPa, find strain energy stored in the bar
• The increase in the length of a bar of length 1 m, area 300 mm2, modulus of elasticity 2×10^5 N/mm2 due to a tensile load of 120 KN is .