cup and cone type fracture is the main characteristics of                   

Related MCQs

• Cleavage fracture is the main characteristics of                   
• in erichsen cupping test for measuring the depth of cup is used
• cast iron, glass, concrete, bricks etc. shows                type of fracture
• mild steel, gold, silver, copper, aluminium, etc. shows type of fracture
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If ultimate tensile load is 8000 kg, the UTS is                     
• In -------- fracture the surface obtained in shining and accompanied with the formation of slip planes.
• The property of the material which enables the formation of permanent deformation without fracture is known as
• a nickel stell has engineeringnstress of 610 N/mm2 . The reduction in area of cross section at the fracture was 38 %. The true stress in the material is