Cleavage fracture is the main characteristics of                   

Related MCQs

• cup and cone type fracture is the main characteristics of                   
• In -------- fracture the surface obtained in shining and accompanied with the formation of slip planes.
• The property of the material which enables the formation of permanent deformation without fracture is known as
• cast iron, glass, concrete, bricks etc. shows                type of fracture
• mild steel, gold, silver, copper, aluminium, etc. shows type of fracture
• a nickel stell has engineeringnstress of 610 N/mm2 . The reduction in area of cross section at the fracture was 38 %. The true stress in the material is                          
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If ultimate tensile load is 8000 kg, the UTS is                     
• during compression test, the point at which fracture initiates in material is called as