cast iron, glass, concrete, bricks etc. shows                type of fracture

Related MCQs

• mild steel, gold, silver, copper, aluminium, etc. shows type of fracture
• a concrete specimen of square cross section is subjected to a force of 100 kN. A side of square is 75 mm. if strain in concrete block is 1.5 x 10-3, the value of youngs modulus for concrete is                       
• cup and cone type fracture is the main characteristics of                   
• In -------- fracture the surface obtained in shining and accompanied with the formation of slip planes.
• The property of the material which enables the formation of permanent deformation without fracture is known as
• Cleavage fracture is the main characteristics of                   
• a nickel stell has engineeringnstress of 610 N/mm2 . The reduction in area of cross section at the fracture was 38 %. The true stress in the material is                          
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If ultimate tensile load is 8000 kg, the UTS is