The term buffer/driver signifies the ability to provide low output currents to drive light loads.

Related MCQs

• The number of standard loads that the output of the gate can drive with out impairment of its normal operation is
• For the device shown here, let all D inputs be LOW, both S inputs be HIGH, and the input be LOW. What is the status of the Y output?
• A certain BCD-to-decimal decoder has active-HIGH inputs and active- LOW outputs. Which output goes LOW when the inputs are 1001?
• The input at the 1, 2, 4, 8 inputs to a 4-line to 16-line decoder with active- low outputs is 1110. As a result, output line 7 is driven LOW.
• he problem of the VOH(min) of a TTL IC being too low to drive a CMOS circuit and meet the CMOS requirement of VIH(min) is usually easily overcome by:
• 1. Open collector output 2. Totem-Pole Output 3. Tri-state output are the type of
• A TTL NAND gate with IIL(max) of –1.6 mA per input drives eight TTL inputs. How much current does the drive output sink?
• In a positive edge triggered JK flip-flop, a low J and low K produces
• The low to high or high to low transition of the clock is considered to be a(n)                
• A gate that could be used to compare two logic levels and provide a HIGH output if they are equal is a(n) .