The JFET is always operated with the gate-source pn junction             -biased.

Related MCQs

• A self-biased n-channel JFET has a VD = 6 V. VGS = –3 V. Find the value of VDS.
• If VD is less than expected (normal) for a self-biased JFET circuit, then it could be caused by a(n)
• Junction Field Effect Transistors (JFET) contain how many diodes?
• A JFET data sheet specifies VGS(off) = –6 V and IDSS = 8 mA. Find the value of ID when VGS = –3 V.
• A JFET data sheet specifies VGS(off) = –10 V and IDSS = 8 mA. Find the value of ID when VGS = –3 V.
• A 35 mV signal is applied to the base of a properly biased transistor with an r'e = 8 Ω and RC = 1 kΩ. The output signal voltage at the collector is:
• A class amplifier is biased slightly above cutoff and operates in the linear region for slightly more than 180º of the input cycle.
• The class amplifier is biased below cutoff.
• Which type of power amplifier is biased for operation at less than 180º of the cycle?
• Class B operation is provided when the dc bias leaves the transistor biased just off, the transistor turning on when the ac signal is applied.