A 35 mV signal is applied to the base of a properly biased transistor with an r'e = 8 Ω and RC = 1 kΩ. The output signal voltage at the collector is:

Related MCQs

• Class B operation is provided when the dc bias leaves the transistor biased just off, the transistor turning on when the ac signal is applied.
• A transistor amplifier has a voltage gain of 100. If the input voltage is 75 mV, the output voltage is:
• When the collector supply is 5V, then collector cut off voltage under dc condition is
• An emitter-follower amplifier has an input impedance of 107 kΩ. The input signal is 12 mV. The approximate output voltage is (common-collector)
• A silicon power transistor is operated with a heat sink (θSA = 1.5ºC/W). The transistor, rated at 150 W (25ºC), has θJC = 0.5º C/W, and the mounting insulation has θCS = 0.6 ºC/W. What is the maximum power that can be dissipated if the ambient temperature is 50ºC and TJmax = 200 ºC?
• The dc load line on a family of collector characteristic curves of a transistor shows the
• The output signal of a common-collector amplifier is always
• The complementary Darlington-connected transistor for a class B amplifier provides output current and output resistance.
• The lower transistor of a totem-pole output is OFF when the gate output is
• The upper transistor of a totem-pole output is OFF when the gate output is