An emitter-follower amplifier has an input impedance of 107 kΩ. The input signal is 12 mV. The approximate output voltage is (common-collector)

Related MCQs

• An amplifier without feedback has a voltage gain of 50, input resistance is 1 KΩ & Output resistance of 2.5KΩ.The input resistance of the current-shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 is
• A transistor amplifier has a voltage gain of 100. If the input voltage is 75 mV, the output voltage is:
• A class C amplifier has a tank circuit in the output. The amplifier is conducting only 28°. The output voltage is
• A common-emitter amplifier has voltage gain, current gain, power gain, and input impedance.
• The impedance of a load must match the impedance of the amplifier so that
• For any inverting amplifier, the impedance capacitance will be                  by a Miller effect capacitance sensitive to the gain of the amplifier and the interelectrode capacitance.
• The total decibel voltage gain of two cascaded voltage amplifier where individual voltage gains are 10 and 100 is
• Calculate the efficiency of a class B amplifier for a supply voltage of VCC = 20 V with peak output voltage of VL(p) = 18 V. Assume RL = 16 Ω.
• A 35 mV signal is applied to the base of a properly biased transistor with an r'e = 8 Ω and RC = 1 kΩ. The output signal voltage at the collector is:
• When negative current feedback is applied to an amplifier, its output impedance