Calculate the efficiency of a class B amplifier for a supply voltage of VCC = 20 V with peak output voltage of VL(p) = 18 V. Assume RL = 16 Ω.

Related MCQs

• A class C amplifier has a tank circuit in the output. The amplifier is conducting only 28°. The output voltage is
• An amplifier without feedback has a voltage gain of 50, input resistance is 1 KΩ & Output resistance of 2.5KΩ.The input resistance of the current-shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 is
• Calculate the efficiency of a transformer-coupled class A amplifier for a supply of 15 V and an output of V(p) = 10 V.
• Consider a zener diode with a slope resistance of 10 Ω in series with a 90 Ω resistor fed from a dc supply containing a ripple voltage of 20mV peak-to-peak. Compute for the ripple voltage in load
• A class A amplifier with RC = 3.3 kΩ and RE = 1.2 kΩ has a VCC = 20 V. Find IC(sat).
• A transistor amplifier has a voltage gain of 100. If the input voltage is 75 mV, the output voltage is:
• In class B operation, at what fraction of VCC should the level of VL(p) be to achieve the maximum power dissipated by the output transistor?
• A form of class A amplifier having maximum efficiency of _          uses a transformer to couple the output signal to the load.
• The total decibel voltage gain of two cascaded voltage amplifier where individual voltage gains are 10 and 100 is
• The complementary Darlington-connected transistor for a class B amplifier provides output current and output resistance.