If the energy is supplied from a source, whose resistance is 1 ohm, to a load of 100 ohms the source will be

Related MCQs

• If resistance across LM in Fig. 2.30 is 15 ohms, the value of R is
• "Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with
• Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with
• An amplifier without feedback has a voltage gain of 50, input resistance is 1 KΩ & Output resistance of 2.5KΩ.The input resistance of the current-shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 is
• What transformer turns ratio is required to match an 8-speaker load so that the effective load resistance seen at the primary is 12.8 k?
• When a transistor amplifier feeds a load of low resistance, its voltage gain will be
• Consider a zener diode with a slope resistance of 10 Ω in series with a 90 Ω resistor fed from a dc supply containing a ripple voltage of 20mV peak-to-peak. Compute for the ripple voltage in load
• In a class A transformer-coupled power amplifier, winding resistance of the transformer determine(s) the dc load line for the circuit.
• Calculate the effective resistance seen looking into the primary of a 20:1 transformer connected to an 8- Ω load.
• For high efficiency of transfer of power, internal resistance of the source should be