2 TYPICAL CONTROL CIRCUITS FOR SHUNT AND SERIES MOTORS

Related MCQs

• In shunt and compound motor starting the shunt field should be made on with full starting resistance in  
• In shunt and compound motor starting the shunt field should be made on with full starting resistance in                          
• Small DC motors have best speed control by                    
• A starter is required for a 220-V shunt motor. The maximum allowable current is 55 A and the minimum current is about 35 A. The armature resistance of the motor is 0.4 Ω. What will be the number of sections of starter resistance required?
• with compensating winding has a field current of 5 A to produce a voltage of 250 V at 1200 rpm. What will be the shunt field current of this machine at no load?
• The starting resistance of a DC shunt motor is generally  
• A 100 hp, 250 V, 350 A shunt dc motor with an armature resistance of 0.05 ohms. To limit maximum starting current to twice the rated of its value, what will be the number of stages of starting resistances?
• The torque limit of speed for a shunt motor  
• A laboratory group was working with a set of 3-hp shunt DC motor. But there was a mistake that it was fused with a 0.3A fuse instead 3A fuse. Then it was started
• Commutator segments in a DC shunt machine is equal to the number of