The forces acting on the web splice of a plate girder are

Related MCQs

• When the depth of a plate girder is at least times the depth of vertical leg of the flange angles, the girder is known as deep plate girder, if is
• When the depth of a plate girder is at least times the depth of vertical leg of the flange angles, the girder is known as deep plate girder, if is
• Minimum thickness of web in a plate girder, when the plate is accessible and also exposed to weather, is
• Minimum thickness of web in a plate girder, when the plate is accessible and also exposed to weather, is
• If W and L are the total superimposed load and the span of a plate girder in metres, the approximate self weight (W) of the girder, is taken as
• If W and L are the total superimposed load and the span of a plate girder in metres, the approximate self weight (W) of the girder, is taken as
• If M is the moment due to a couple in a bearing plate whose width is b and allowable bending stress is P, the thickness (t) of the bending plate of the column splice, is
• If M is the moment due to a couple in a bearing plate whose width is b and allowable bending stress is P, the thickness (t) of the bending plate of the column splice, is
• In a truss girder of a bridge, a diagonal consists of mild steel flat 4001.S.F. and carries a pull of 80 tonnes. If the gross-diameter of the rivet is 26 mm, the number of rivets required in the splice, is
• In a truss girder of a bridge, a diagonal consists of mild steel flat 4001.S.F. and carries a pull of 80 tonnes. If the gross-diameter of the rivet is 26 mm, the number of rivets required in the splice, is