McqMate
Chapters
1. |
Which of the following joint have high corrosion resistance? |
A. | Welding joint |
B. | Riveted joint |
C. | Bolted joint |
D. | None of the above |
Answer» A. Welding joint |
2. |
The metals having good weldability, in descending order are |
A. | cast steel, iron, carbonsteel, castiron |
B. | carbon steel, iron, cast steel, castiron |
C. | iron, carbonsteel, cast steel, castiron |
D. | castiron, iron, carbon steel, cast steel |
Answer» A. cast steel, iron, carbonsteel, castiron |
3. |
Which of the following is not included in weldability? |
A. | Ability of mechanical soundness |
B. | Serviceability of joint |
C. | Strain relieving brittleness |
D. | Metallurgical compatibility of metal |
Answer» C. Strain relieving brittleness |
4. |
On which of the following factor, does weldability not depend? |
A. | Boiling point |
B. | Melting point |
C. | Thermal expansion |
D. | Thermal conductivity |
Answer» A. Boiling point |
5. |
Which ofthe following is not away of correcting the metalwhich does not have good weldability properties? |
A. | Procedure of welding |
B. | Provision of fluxing material |
C. | Provision of filler material |
D. | Procedure of adding filler materials |
Answer» D. Procedure of adding filler materials |
6. |
Which of the following is an example of plastic welding? |
A. | Gas welding |
B. | Arc welding |
C. | Forge welding |
D. | Thermit welding |
Answer» C. Forge welding |
7. |
Which of the following is an example of fusion welding? |
A. | Arc welding |
B. | Forge welding |
C. | Resistance welding |
D. | Thermit welding with pressure |
Answer» A. Arc welding |
8. |
Which ofthe followingwelding process is usedforweldingof sheetmetals in automobile and air craft industries? |
A. | Shield metal arc welding |
B. | Gas tungsten arc welding |
C. | Thermit welding |
D. | Resistance welding |
Answer» D. Resistance welding |
9. |
In which of the following process, heat is created by blacksmith fire |
A. | Forge welding |
B. | Spot welding |
C. | Projection welding |
D. | Seam welding |
Answer» A. Forge welding |
10. |
The voltage needed in resistance welding does not depend upon |
A. | Composition |
B. | Area |
C. | Thickness of weld |
D. | Length of weld |
Answer» D. Length of weld |
11. |
In resistance welding, two electrodes are made of |
A. | Aluminium |
B. | Copper |
C. | Iron |
D. | Bronze |
Answer» B. Copper |
12. |
Arc welding machine uses only D.C. supply. |
A. | True |
B. | False |
C. | all |
D. | none |
Answer» B. False |
13. |
The negative pole of the electrode burns away faster than the positive pole. |
A. | True |
B. | False |
C. | all |
D. | none |
Answer» B. False |
14. |
Which of the following is affected by weld contour? |
A. | Fatigue |
B. | Creep |
C. | Highpressureproperty |
D. | Lowpressureproperty |
Answer» A. Fatigue |
15. |
Which of the following materials are not suited for cold welding? |
A. | Brass |
B. | Steel |
C. | Silver |
D. | Gold |
Answer» B. Steel |
16. |
Match the following
|
A. | 1-3, 2-2, 3-1 |
B. | 1-3, 2-1, 3-2 |
C. | 1-2, 2-3, 3-1 |
D. | 1-2, 2-1,3-3 |
Answer» B. 1-3, 2-1, 3-2 |
17. |
What is the capacity of an automatic welding machine? |
A. | 100 to200A |
B. | 300 to 400A |
C. | 500 to700A |
D. | 800 to 3000A |
Answer» D. 800 to 3000A |
18. |
What is the capacity of a light manual welding machine? |
A. | 100 to200A |
B. | 300 to 400A |
C. | 500 to700A |
D. | 60 amp to 500 amp |
Answer» C. 500 to700A |
19. |
What is the efficiency of an A.C. welding transformer? |
A. | 0.6 |
B. | 0.7 |
C. | 0.8 |
D. | 0.9 |
Answer» C. 0.8 |
20. |
What is the amount of electric energy required per kg in dc welding operation? |
A. | 1-4 kWh |
B. | 3-7 kWh |
C. | 4-9 kWh |
D. | 6-10 kWh |
Answer» D. 6-10 kWh |
21. |
During fabrication joining of two or more components are ___ |
A. | Temporarily |
B. | Permanently |
C. | Temporarily or permanently both |
D. | None of the above |
Answer» C. Temporarily or permanently both |
22. |
During fabrication which processes are included |
A. | Welding |
B. | Brazing |
C. | Soldering |
D. | All of the above |
Answer» D. All of the above |
23. |
The Weldability of the metals in descending order |
A. | Iron, Steel, Cast iron, Low Alloy steel |
B. | Steel, Cast iron, Iron, Low Alloy steel |
C. | Iron, Cast iron, steel, low Alloy steel |
D. | Steel, Iron, Cast iron, Low Alloy steel |
Answer» A. Iron, Steel, Cast iron, Low Alloy steel |
24. |
The Weldability of the metals in Ascending order |
A. | Low Alloy Steel, Stainless Steel, Cast Iron, Steel |
B. | Low Alloy Steel, Cast Iron, Steel, Stainless Steel |
C. | Stainless Steel, Low Alloy Steel, Cast Iron, Steel |
D. | Stainless Steel, Low Alloy Steel, Steel, Cast Iron |
Answer» C. Stainless Steel, Low Alloy Steel, Cast Iron, Steel |
25. |
During the welding power require to produce arc to join the metals are |
A. | Low voltage low ampere |
B. | Low voltage high ampere |
C. | High voltage low ampere |
D. | High voltage high ampere |
Answer» B. Low voltage high ampere |
26. |
Out of them which of the power source used in welding |
A. | Bilopar welding generator, |
B. | Multi operator D.C. welding sets |
C. | Both of them |
D. | None of them |
Answer» C. Both of them |
27. |
Static type power sources include |
A. | Transformer, Motor-driven generator |
B. | Rectifier, Engine-driven Generator |
C. | Transformer, Rectifier |
D. | Motor-driven generator, Engine-driven generator |
Answer» C. Transformer, Rectifier |
28. |
Rotating type power sources includes |
A. | Transformer, Motor-driven generator |
B. | Rectifier, Engine-driven Generator |
C. | Transformer, Rectifier |
D. | Motor-driven generator, Engine-driven generator |
Answer» D. Motor-driven generator, Engine-driven generator |
29. |
Which type of plates cannot be welded in single pass |
A. | Thick plates |
B. | Thin Plates |
C. | all |
D. | none |
Answer» A. Thick plates |
30. |
In power-sources Transformer can change polarity or not? |
A. | Yes |
B. | No |
C. | all |
D. | none |
Answer» B. No |
31. |
In arc welding voltage is dependent of _____ |
A. | Arc length |
B. | Arc gap |
C. | Both of them |
D. | None of them |
Answer» C. Both of them |
32. |
The percentage of __ minutes duration during which the power source with necessary output can be used without causing any damage |
A. | 5 |
B. | 10 |
C. | 50 |
D. | 60 |
Answer» B. 10 |
33. |
In power sources Current used is |
A. | 50-1000 Amp |
B. | 500-1000 Amp |
C. | 100-500 Amp |
D. | 50-200 Amp |
Answer» A. 50-1000 Amp |
34. |
Full form of OCV is |
A. | Output current voltage |
B. | Open command voltage |
C. | Open current voltage |
D. | Output command voltage |
Answer» C. Open current voltage |
35. |
Which type of Power source is Solid State |
A. | Static type |
B. | Rotating type |
C. | Special type |
D. | None of them |
Answer» C. Special type |
36. |
Which of power source is an engine-driven generator |
A. | Static type |
B. | Rotating type |
C. | Special type |
D. | None of them |
Answer» B. Rotating type |
37. |
Which of power source is Rectifier? |
A. | Static type |
B. | Rotating type |
C. | Special type |
D. | None of them |
Answer» A. Static type |
38. |
Full-Form of the MMAW is |
A. | Manual metal arc welding |
B. | Molted metal arc welding |
C. | Mix Metal arc welding |
D. | Metal arc welding |
Answer» A. Manual metal arc welding |
39. |
The voltage needed in resistance welding does not depend upon |
A. | Composition |
B. | Area |
C. | Thickness |
D. | Length |
Answer» D. Length |
40. |
Which type of process is also known as the fabrication process? |
A. | Casting |
B. | Forming |
C. | Joining |
D. | None of them |
Answer» C. Joining |
41. |
Arc length in arc welding should be equal to ___ |
A. | Half the diameter of the electrode rod |
B. | Rod diameter |
C. | Twice the rod diameter |
D. | None of the above |
Answer» B. Rod diameter |
Done Reading?