

McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Biomedical Engineering .
Chapters
51. |
Find the center frequency of wide band-pass filter |
A. | fc= √(fh ×fL) |
B. | fc= √(fh +fL) |
C. | fc= √(fh -fL) |
D. | fc= √(fh /fL) |
Answer» A. fc= √(fh ×fL) |
52. |
Find out the voltage gain magnitude equation for the wide band-pass filter. |
A. | AFt×( f/fL)/√[(1+(f/fh)2]×[1+(f/fL)2]. |
B. | AFt/ √{[1+(f/fh)2]×[1+(f/fL)2]} |
C. | AFt/ √{[1+(f/fh)2]/[1+(f/fL)2]} |
D. | [AFt/(f/fL)]/ √{[1+(f/fh)2]/[1+(f/fL)2]} |
Answer» A. AFt×( f/fL)/√[(1+(f/fh)2]×[1+(f/fL)2]. |
53. |
When a second order high pass filter and second order low pass sections are cascaded, the resultant filter is a |
A. | ±80dB/decade band-pass filter |
B. | ±40dB/decade band-pass filter |
C. | ±20dB/ decade band-pass filter |
D. | None of the mentioned |
Answer» B. ±40dB/decade band-pass filter |
54. |
Find the voltage gain magnitude of the wide band-pass filter? Where total pass band gain is=6, input frequency = 750Hz, Low cut-off frequency =200Hz and high cut-off frequency=1khz. |
A. | 13.36 dB |
B. | 12.25 dB |
C. | 11.71 dB |
D. | c) 14.837dB |
Answer» D. c) 14.837dB |
55. |
Compute the quality factor of the wide band-pass filter with high and low cut-off frequencies equal to 950Hz and 250Hz. |
A. | 0.278 |
B. | 0.348 |
C. | 0.696 |
D. | 0.994 |
Answer» C. 0.696 |
56. |
The details of low pass filter sections are given as fh =10kHz, AF= 2 and f=1.2kHz. Find the voltage gain magnitude of first order wide band-pass filter, if the voltage gain magnitude of high pass filter section is 8.32dB. |
A. | 48.13dB |
B. | 10.02dB |
C. | 14.28dB |
D. | 65.99dB |
Answer» C. 14.28dB |
57. |
The quality factor of a wide band-pass filter can be |
A. | 12.6 |
B. | 9.1 |
C. | 14.2 |
D. | 10.9 |
Answer» B. 9.1 |
58. |
If the gain at center frequency is 10, find the quality factor of narrow band-pass filter |
A. | 1 |
B. | 2 |
C. | 3 |
D. | None of the mentioned |
Answer» C. 3 |
59. |
The advantage of narrow band-pass filter is |
A. | fc can be changed without changing gain |
B. | fc can be changed without changing bandwidth |
C. | fc can be changed without changing resistors |
D. | All of the mentioned |
Answer» D. All of the mentioned |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.