140
85.3k

160+ Introduction to Computers Solved MCQs

These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Bachelor of Computer Applications (BCA) .

Chapters

Chapter: Unit 4
101.

_______ is used to get the features of data accuracy, disk drive storage.

A. Control mode
B. Interrupt mode
C. Isochronous mode
D. Bulk mode
Answer» D. Bulk mode
102.

Which of the following mode guarantees the timing of data delivery?

A. Control mode
B. Interrupt mode
C. Isochronous mode
D. Bulk mode
Answer» C. Isochronous mode
103.

The USB 2.0 allows the maximum data speed at the rate of

A. 480 MB/s
B. 520 MB/s
C. 250 MB/s
D. 350 MB/s
Answer» A. 480 MB/s
104.

Bootable pen drives are also known as

A. Heavy drives
B. Light drives
C. Live drives
D. Hard drives
Answer» C. Live drives
105.

Memory stick is launched by

A. Sony
B. Microsoft
C. Motorola
D. IBM
Answer» A. Sony
106.

The function of _______ is to get the computer software operating when the power is turned on.

A. Bootstrap Loader
B. Cache memory
C. RAM
D. ROM
Answer» A. Bootstrap Loader
107.

In ___________stored information is erased by exposing the chip for a while to ultraviolet light.

A. EPROM
B. ROM
C. PROM
D. UVEROM
Answer» D. UVEROM
108.

________ memory is faster than the main memory.

A. Secondary
B. Internal processor memory
C. Cache memory
D. All of the above
Answer» C. Cache memory
109.

_______ refers to the mode in which memory location can be accessed in any order in the same amount of time.

A. Sequential access
B. Direct access
C. Random Access Memory (RAM)
D. None of the above
Answer» C. Random Access Memory (RAM)
110.

Memories that can be accessed only in a pre-defined sequence are

A. Sequential access memories
B. Direct access memories
C. Random Access Memories (RAM)
D. None of the above
Answer» A. Sequential access memories
111.

If the storage unit can retain the data even after the power is turned off or interrupted, it is termed as

A. Volatile storage
B. Non-volatile storage
C. Temporary storage
D. None of the above
Answer» B. Non-volatile storage
112.

The amount of data that can be stored or the number of bytes that can be stored per liner inch of tape is

A. The data recording capacity
B. The data recording storage
C. The data recording density
D. None of the above
Answer» C. The data recording density
113.

________ devices are also called random-access devices because information is literally available at random or in any order.

A. Direct- access
B. Sequential-access
C. Permanent-access
D. All of the above
Answer» A. Direct- access
114.

For faster access of data from disk packs ______ are used.

A. Disks
B. Tapes
C. Cartridge
D. Cylinders
Answer» D. Cylinders
115.

ISYS was originally developed for _______ in the year 1988.

A. Microsoft Windows Operating System
B. Microsoft Disk Operating System
C. Linux Operating System
D. None of the above
Answer» B. Microsoft Disk Operating System
116.

The disks in which both the surfaces are used for recording are called

A. Double-Sided (DS) disks
B. Double Density(DD) disks
C. High Density
Answer» A. Double-Sided (DS) disks
117.

The Compact Disk (CD) was invented by

A. Yoshiro Nakamatsu
B. James Russell
C. Jean Bartik
D. Robert Dennard
Answer» B. James Russell
118.

Digital Versatile Disc-Rewritable (DVD-RW)are rewritable up to

A. 100 times
B. 1000 times
C. 500 times
D. 2000 times
Answer» B. 1000 times
119.

_______ is a communication transfer mode in which data is transferred in both directions to send and transfer the small amount of data.

A. Interrupt mode
B. Isochronous mode
C. Control mode
D. Interrupt mode
Answer» C. Control mode
120.

DVD-RW can hold ______ times more data than a full size CD-R.

A. Two
B. Five
C. Seven
D. Ten
Answer» C. Seven
Chapter: Unit 5
121.

__________ is a process of executing programs one after the other using a batch file program.

A. Multitasking
B. Multiprogramming
C. Time sharing
D. Batch processing
Answer» D. Batch processing
122.

Which of the following refers to loading two or more programs in the computer main memory and executing them concurrently?

A. Multitasking
B. Multiprogramming
C. Time sharing
D. Batch processing
Answer» B. Multiprogramming
123.

Three states in time-sharing system are

A. Ready, running and dead
B. Ready, begin and running
C. Ready, running and blocked
D. Ready, running and interrupt
Answer» C. Ready, running and blocked
124.

The ability of the computer to handle several application programs concurrently so that the idle time of the processor is reduced is called

A. Multitasking
B. Multiprogramming
C. Batch processing
D. Time sharing
Answer» A. Multitasking
125.

UNIX was originally developed in 1969 by employees of

A. Microsoft
B. AT&T
C. Sun
D. Apple
Answer» B. AT&T
126.

Which of the following device is used in a real-time processing?

A. ATM
B. Keyboard
C. Voice-recognition device
D. All of the above
Answer» D. All of the above
127.

Examples of popular Linux distributions are

A. Red Hat
B. Mandrake
C. SCSE
D. All of the above
Answer» D. All of the above
128.

The ability of the CPU to serve many users connected to it through network is called

A. Timesharing
B. Networking
C. Multitasking
D. Multiprogramming
Answer» A. Timesharing
129.

C is known as

A. Low level programming language
B. High level programming language
C. Machine language
D. None of the above
Answer» B. High level programming language
130.

Which of the following is language processor?

A. Assembler
B. Interpreter
C. Compiler
D. All of the above
Answer» D. All of the above
131.

_______ converts an assembly language program into machine language.

A. Assembler
B. Interpreter
C. Compiler
D. All of the above
Answer» A. Assembler
132.

MS-DOS is a ________ operating system offered by Microsoft.

A. Single-user, single tasking
B. Single user, multitasking
C. Multiuser, multitasking
D. Multiuser, single tasking
Answer» A. Single-user, single tasking
133.

A computer connected to a network is called a ________.

A. Hub
B. Bridge
C. Router
D. Node
Answer» D. Node
134.

In ________ topology, each device connects to a central point through cables in a network.

A. Bus topology
B. Star topology
C. Ring topology
D. Hybrid topology
Answer» B. Star topology
135.

Which of the following is an example of Star topology?

A. ARCnet
B. 10 Base-T, 100 Base-TX
C. Neither (A) nor (B)
D. Both (A) and (B)
Answer» B. 10 Base-T, 100 Base-TX
136.

FDDI is an example of _______.

A. Bus topology
B. Star topology
C. Ring topology
D. Hybrid topology
Answer» C. Ring topology
137.

________ refers to a network used to connect different equipments from remote areas.

A. LAN
B. WAN
C. MAN
D. None of the above
Answer» B. WAN
138.

_______refer to the LANs connected through high-speed, seamless inter-connection within a ‘metropolitan’ area.

A. Remote LAN
B. WAN
C. MAN
D. None of the above
Answer» C. MAN
139.

_________ is the lower part of TCP/IP whose function is to handle the address part of each packet to enable it to be delivered to the right destination.

A. IP
B. TCP
C. FTP
D. Telnet
Answer» A. IP
140.

________is the simplest and most commonly used protocol for downloading/uploading a file from/to a server.

A. IP
B. TCP
C. FTP
D. Telnet
Answer» C. FTP
141.

_________ is a unique number associated with each computer making it uniquely identifiable amongst all the computers connected to the Internet.

A. IP address
B. MAC address
C. Inode
D. None of the above
Answer» A. IP address
142.

________is the language for publishing hypertext pages on WWW.

A. HTTP
B. High level language
C. Machine language
D. HTML
Answer» D. HTML
143.

Examples of meta-search engines are

A. MetaCrawler
B. Mamma
C. DogPile
D. All of the above
Answer» D. All of the above
144.

The Internet Relay Chat was developed by

A. Jarkko Oikarinen
B. Tim Berners-Lee
C. Robert Cailliau
D. None of the above
Answer» A. Jarkko Oikarinen
145.

Which of the following is not an example of search engine?

A. Google
B. Gmail
C. Yahoo
D. Altavista
Answer» B. Gmail
146.

Inserting spurious data or information into an organization’s system to disrupt or overload services is called

A. Interruption
B. Interception
C. Modification
D. Fabrication
Answer» D. Fabrication
147.

Human speech can be effectively reproduces at a rate of

A. 2.5 kHz
B. 5.5 kHz
C. 10 kHz
D. 11kHz
Answer» B. 5.5 kHz
148.

Which of the following language processors converts a high-level language program line by line into a machine language?

A. Assembler
B. Interpreter
C. Compiler
D. None of the above
Answer» C. Compiler
149.

The first Linux kernel was released to the public in

A. 1990
B. 1991
C. 1992
D. 1993
Answer» B. 1991
150.

Microsoft released Windows NT in

A. 1990
B. 1991
C. 1992
D. 1993
Answer» D. 1993

Done Studing? Take A Test.

Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.