McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Mechanical Engineering .
| 151. |
Electrical strain gauge works on the principle of |
| A. | variation of resistance |
| B. | variation of capacitance |
| C. | variation of inductance |
| D. | variation of area |
| Answer» A. variation of resistance | |
| 152. |
The strain gauge is not bonded to the specimen. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 153. |
Bonding element in a strain gauge must have |
| A. | zero insulation resistance |
| B. | low insulation resistance |
| C. | high insulation resistance |
| D. | infinite insulation resistance |
| Answer» C. high insulation resistance | |
| 154. |
Commonly used elements for wire strain gauges are |
| A. | nickel and copper |
| B. | nickel and gold |
| C. | gold and brass |
| D. | silver and aluminium |
| Answer» A. nickel and copper | |
| 155. |
Cement is classified under |
| A. | 4 types |
| B. | 2 types |
| C. | 6 types |
| D. | 8 types |
| Answer» B. 2 types | |
| 156. |
Proper functioning of a strain gauge depends on |
| A. | strain |
| B. | stress |
| C. | bonding |
| D. | length of wire |
| Answer» C. bonding | |
| 157. |
Proper bonding causes errors in strain gauges. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 158. |
What principle defines eddy current inspection (ECI)? |
| A. | lenz law |
| B. | biot-savart law |
| C. | electromagnetic induction principle |
| D. | faraday’s law |
| Answer» C. electromagnetic induction principle | |
| 159. |
ECI is generally restricted to a depth below |
| A. | 1µm |
| B. | 1mm |
| C. | 2mm |
| D. | 6mm |
| Answer» D. 6mm | |
| 160. |
What is the reason for the limitation of depth below 6mm in ECI? |
| A. | surface coating |
| B. | electron hole pair generation |
| C. | skin effect |
| D. | residual stresses |
| Answer» C. skin effect | |
| 161. |
The total resistance of the coil of ECI is known as |
| A. | impedance |
| B. | inductance |
| C. | reactance |
| D. | capacitance |
| Answer» A. impedance | |
| 162. |
ECI is only used for ferromagnetic materials. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 163. |
Standard penetration depth varies from material to material. |
| A. | true |
| B. | false |
| Answer» A. true | |
| 164. |
What is acoustic impedance (in MPa s/m) of aluminum? |
| A. | 1.58 |
| B. | 45.72 |
| C. | 16.77 |
| D. | 41.08 |
| Answer» C. 16.77 | |
| 165. |
Which of the following is the poorest transmitter of sound? |
| A. | oil |
| B. | water |
| C. | air |
| D. | copper |
| Answer» C. air | |
| 166. |
Which of the following is the best transmitter of sound? |
| A. | oil |
| B. | aluminum |
| C. | steel |
| D. | copper |
| Answer» C. steel | |
| 167. |
What is the drawback of ultrasonic testing? |
| A. | low depth |
| B. | high sensitivity |
| C. | shape restriction |
| D. | higher errors |
| Answer» B. high sensitivity | |
| 168. |
What is a type of piezoelectric crystal? |
| A. | natural |
| B. | normal |
| C. | angle |
| D. | transverse |
| Answer» A. natural | |
| 169. |
The object under inspection must have parallel surfaces. |
| A. | true |
| B. | false |
| Answer» A. true | |
| 170. |
Ultrasonic testing is destructive testing? |
| A. | true |
| B. | false |
| Answer» B. false | |
| 171. |
Hall Effect is a/an |
| A. | electronic |
| B. | magnetic |
| C. | galvanic |
| D. | ionizing |
| Answer» C. galvanic | |
| 172. |
Which of the following represents the correct expression of Lorentz force? |
| A. | eh/b |
| B. | eeh/b |
| C. | eeh |
| D. | none of the mentioned |
| Answer» B. eeh/b | |
| 173. |
Hall potential is inversely proportional to magnetic flux density. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 174. |
Hall Effect is clearly visible in |
| A. | pure conductors |
| B. | semiconductors |
| C. | super conductors |
| D. | metals |
| Answer» B. semiconductors | |
| 175. |
Force exerted by magnetic field in Hall Effect transducers is |
| A. | lorentz force |
| B. | hall effect force |
| C. | magnetic force |
| D. | electric force |
| Answer» A. lorentz force | |
| 176. |
Which of the following represents correct expression for Lorentz force? |
| A. | bev |
| B. | bv |
| C. | ev |
| D. | b |
| Answer» A. bev | |
| 177. |
Which of the following represents the output of Hall Effect transducer? |
| A. | hall potential |
| B. | emf |
| C. | applied voltage |
| D. | lorentz voltage |
| Answer» A. hall potential | |
| 178. |
Hall Effect transducers attain equilibrium instantaneously. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 179. |
Hall Effect transducer can be used to measure |
| A. | magnetic field |
| B. | angular displacement |
| C. | linear displacement |
| D. | all of the mentioned |
| Answer» D. all of the mentioned | |
| 180. |
What is ESP8266? |
| A. | wifi module |
| B. | sensor |
| C. | board |
| D. | usb cable |
| Answer» A. wifi module | |
| 181. |
which sensor is LM35? |
| A. | pressure sensor |
| B. | humidity sensor |
| C. | temperature sensor |
| D. | touch sensor |
| Answer» C. temperature sensor | |
| 182. |
How many pins does temperature sensor have? |
| A. | 5 legs |
| B. | 2 legs |
| C. | 4 legs |
| D. | 3 legs |
| Answer» D. 3 legs | |
| 183. |
Monnit temperature sensor is used for what? |
| A. | accurate results |
| B. | to measure the temperature at high degree |
| C. | temperature sensor |
| D. | pressure sensor |
| Answer» A. accurate results | |
| 184. |
Which of the following is the Wireless battery-free sensor? |
| A. | lm35 |
| B. | rfm3200 |
| C. | esp8266 |
| D. | dht11 |
| Answer» B. rfm3200 | |
| 185. |
Which sensor is used for monitor electric distribution and switching equipment temperature? |
| A. | lm35 |
| B. | esp8266 |
| C. | dht11 |
| D. | rfm3200 |
| Answer» D. rfm3200 | |
| 186. |
Electric motor protection has which sensor? |
| A. | pressure sensor |
| B. | touch sensor |
| C. | temperature sensor |
| D. | humidity sensor |
| Answer» C. temperature sensor | |
| 187. |
What is DS18B20? |
| A. | pressure sensor |
| B. | touch sensor |
| C. | humidity sensor |
| D. | temperature sensor |
| Answer» D. temperature sensor | |
| 188. |
What is STSC1? |
| A. | pressure sensor |
| B. | temperature sensor |
| C. | touch sensor |
| D. | humidity sensor |
| Answer» B. temperature sensor | |
| 189. |
Line of sight of wireless sensor tag is |
| A. | 750ft |
| B. | 700ft |
| C. | 500ft |
| D. | 550ft |
| Answer» B. 700ft | |
| 190. |
A is thermally sensitive resistor that exhibits a large change in resistance. |
| A. | thermistor |
| B. | resistance thermometer |
| C. | thermo couple |
| D. | semiconductor based sensor |
| Answer» A. thermistor | |
| 191. |
measures temperature by correlating the resistance of the RTD with temperature. |
| A. | thermistor |
| B. | resistance thermometer |
| C. | thermo couple |
| D. | semiconductor based sensor |
| Answer» B. resistance thermometer | |
| 192. |
consists of two different metals connected at two points. |
| A. | thermistor |
| B. | resistance thermometer |
| C. | thermocouple |
| D. | semiconductor based sensor |
| Answer» C. thermocouple | |
| 193. |
Which type of temperature sensor is placed in Integrated Circuits? |
| A. | thermistor |
| B. | resistance thermometer |
| C. | thermocouple |
| D. | semiconductor based sensor |
| Answer» D. semiconductor based sensor | |
| 194. |
Which sensor is linear and low accuracy? |
| A. | thermistor |
| B. | resistance thermometer |
| C. | thermocouple |
| D. | semiconductor based sensor |
| Answer» D. semiconductor based sensor | |
| 195. |
Optical fiber sensors are electrically |
| A. | active |
| B. | passive |
| C. | active as well as passive |
| D. | cannot be determined |
| Answer» B. passive | |
| 196. |
Optical fibers are not immune to |
| A. | electronic disturbances |
| B. | magnetic disturbances |
| C. | ambient light interference |
| D. | electromagnetic disturbances |
| Answer» C. ambient light interference | |
| 197. |
Optical fiber sensors are not immune to electromagnetic disturbances. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 198. |
In which of the following optic fiber sensor the fiber is simply used to carry light to and from an external optical device where the sensing takes place? |
| A. | extrinsic fiber optic sensor |
| B. | energized fiber optic sensor |
| C. | all fibers are used to simply carry light to and from the external optical devices |
| D. | intrinsic fiber optic sensor |
| Answer» A. extrinsic fiber optic sensor | |
| 199. |
On the bases of application of optic fiber sensor, which of the following is not considered to be the classification of fiber optic sensor? |
| A. | biomedical/photometric sensors |
| B. | physical sensors |
| C. | thermal sensors |
| D. | chemical sensors |
| Answer» C. thermal sensors | |
| 200. |
The type of sensor that detects the analyte species directly through their characteristic spectral properties is called |
| A. | chemical sensor |
| B. | thermal sensor |
| C. | light sensor |
| D. | spectroscopic sensors |
| Answer» D. spectroscopic sensors | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.