168
87.3k

110+ Pharmaceutical Engineering Solved MCQs

These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Bachelor of Pharmacy (B. Pharma) , Pharmacy .

101.

Dry spots are formed during one of the following period?

A. Constant Rate period
B. First Falling period
C. Initial Adjustment period
D. Second falling period
Answer» B. First Falling period
102.

Eutectic Point is an important factor for one of the following drying processes?

A. Drum Drying
B. Fluidized Bed Drying
C. Tray drying
D. Freeze Drying
Answer» D. Freeze Drying
103.

Filtration is a unit operation that is commonly used for collecting:

A. Filtrate
B. Particulate matter
C. Precipitate
D. Slurry
Answer» A. Filtrate
104.

Who has proposed that the filtration process is similar to the streamline flow of a liquid under pressure through capillaries?

A. Carman
B. Darcy
C. Kozeny
D. Poiseuilli
Answer» D. Poiseuilli
105.

Which is the principle difference in the properties that influences centrifugation?

A. Densities
B. Interfacial Tensions
C. Particle size
D. Viscosities
Answer» A. Densities
106.

Centrifugal method is used for one of the following process:

A. Mixing
B. Purification
C. Separation
D. Sizing
Answer» C. Separation
107.

Water Attack test is performed on glass in order to find the limits of one of the following?

A. Acid liberated
B. Alkali liberated
C. Conductivity
D. Metal ions
Answer» B. Alkali liberated
108.

In Pharmaceutical packing, collapsible tubes made from lead are not used as such, for one of the following reason.

A. Costly metal
B. Difficulty in packing
C. Risk of Poisoning
D. Soft in strength
Answer» C. Risk of Poisoning
109.

One of the following glass containers is used for the storage of light sensitive pharmaceuticals.

A. Air-Tight
B. Amber Colored
C. Unit Dose
D. Well closed
Answer» B. Amber Colored
110.

Containers meant for storage of injections (buffered & unbuffered aqueous solutions) are made from one of the following type of glasses.

A. Borosilicate
B. General Purpose
C. Lime soda
D. Neutral
Answer» A. Borosilicate
111.

Hermetic sealed containers are also known as:

A. Air-Tight Containers
B. Multi-dose containers
C. Single-Dose containers
D. Well-closed containers
Answer» A. Air-Tight Containers
112.

Which metal makes steel corrosion resistant?

A. Copper and selenium
B. Tantalum and molybdenum
C. Chromium and Nickel
D. Titanium and Niobium
Answer» C. Chromium and Nickel
113.

The ability of a metal surface to withstand repeated cycles of corrosion is known as:

A. Cavitation erosion
B. Corrosion fatigue
C. Erosion
D. Stress of corrosion cracking
Answer» B. Corrosion fatigue
114.

Corrosion of metals is fairly high in one of the following medium:

A. Acidic
B. Alkaline
C. Neutral
D. Non-Aqueous
Answer» A. Acidic
115.

Galvanic Corrosion is observed, when external electric current in solution is passed between one of the following combinations:

A. Gold & Platinum
B. Iron & hydrogen
C. Iron & Iron
D. Zinc & Copper
Answer» D. Zinc & Copper
116.

In Cyclone separator, the separation depends on:

A. Size & Shape
B. Shape and Surface area
C. Size & Density
D. Surface texture & Size
Answer» C. Size & Density
117.

One of the theories is NOT applicable to distillation:

A. Graham’s law of diffusion
B. Law of conservation of energy
C. Law of conservation of matter
D. Raoult’s Law
Answer» A. Graham’s law of diffusion
118.

Which product is NOT dried by spray dryer?

A. Serum
B. Fruit Juice
C. Lactose
D. Bacterial & viral cultures
Answer» D. Bacterial & viral cultures
119.

The correct definition of filtration is:

A. When solids are present in a very low concentration, i.e., not exceeding 1.0% w/v, the process of its separation from liquids
B. When solids are present in a very low concentration, i.e., not exceeding 5.0% w/v, the process of its separation from liquids
C. When solids are present in a very low concentration, i.e., not exceeding 2.0% w/v, the process of its separation from liquids
D. When solids are present in a very low concentration, i.e., not exceeding 7.0% w/v, the process of its separation from liquids
Answer» A. When solids are present in a very low concentration, i.e., not exceeding 1.0% w/v, the process of its separation from liquids

Done Studing? Take A Test.

Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.