For rectangular section, Hydraulic mean depth is

Related MCQs

• A rectangular plate of 2 m x 3 m height is immersed in water vertically with top edge parallel to and at depth of 3 m below free surface. Calculate total water pressure.
• The equation of rectangular notch is deal with H is
• Water is flowing through a rectangular notch, having base width 500 mm and head over it is 160 mm. Find discharge of notch if Cd = 0.6.
• A rectangular notch gives more accurate results for low discharges than a triangular notch.
• The place, where the hydraulic jump takes place, a lot energy of the flowing liquid is dissipated.
• The diameters of a pipe at the sections 1 and 2 are 10 cm and15 cm respectively. The velocity of water flowing through the pipe at section 1 is 5 m/s. Determine the velocity at section 2.
• A swimming pool having one side 10 m long, is filled with water up to 3.6 m depth. Find total pressure on the wall of the pool
• A circular plate 2.5 m diameter is immersed in water with its greatest and lowest depth below the free surface being 3.0m and 1.0m respectively. Find the position of centre of pressure
• A sudden increase in the depth of canal flow is called
• Liquid is flowing through 200 mm diameter tube with mean velocity of 2 m/sec. If density of liquid is 912 kg/m3 and viscosity is0.38 N.S/m2 find type of flow.