Wheels of a rolling stock are provided flanges on

Related MCQs

• Coning of wheels is provided
• The tread of wheels is provided an outward slope of
• The total gap on both sides between the inside edges of wheel flanges and gauge faces of the rail is kept as
• Distance between inner faces of the flanges, is kept
• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• The load on each axle of a locomotive is 22 tonnes. If the coefficient of friction is 0.2, then the hauling capacity due to 3 pairs of driving wheels will be
• Coning of wheels
• A train is hauled by 4-8-2 locomotive. The number of driving wheels in this locomotive is
• The slipping of driving wheels of locomotives on the rail surface causes
• If the stock rails are B.H. rails, the type of switch generally provided, is