McqMate

Q. |
## According to the Unwin's formula, if is thickness of the plate in mm, the nominal diameter of the rivet, is |

A. | d = 1.91 t |

B. | d = 1.91 t2 |

C. | d = 1.91 t |

D. | d = 1.91 t |

Answer» C. d = 1.91 t |

895

0

Do you find this helpful?

8

View all MCQs in

Design of Steel StructuresNo comments yet

- According to the Unwin's formula, if is thickness of the plate in mm, the nominal diameter of the rivet, is
- The distance measured along one rivet line from the centre of a rivet to the centre of adjoining rivet on an adjacent parallel rivet line, is called
- The distance measured along one rivet line from the centre of a rivet to the centre of adjoining rivet on an adjacent parallel rivet line, is called
- If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin's formula will be
- If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin's formula will be
- When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which moment in any rivet.)
- Diameter of a rivet hole is made larger than the diameter of the rivet by
- The difference between gross diameter and nominal diameter for the rivets up to 25 mm diameter is
- The difference between gross diameter and nominal diameter for the rivets up to 25 mm diameter is
- The minimum edge distance of a rivet line connecting two or more plates, is kept equal to 37 mm plus (where t is the thickness in mm of the thinner outside plate).