For steel ultimate strength in tension compared to that in shear is

Related MCQs

• The loss of strength in compression which occurs when there is a gain in strength in the tension due to overloading is
• If the Brinell hardness number of a sample of steel is 200, the ultimate tensile strength will be approximately
• The ultimate strength design of steel structures makes use of
• For maximum horse power transmission in belt drives the velocity of belt left such that the ration tight side driving tension/centrifugal tension is
• If machine number is loaded in such a way that the three principla stresses at a point are 600 kg/cm2 compression. 800 kg/cm2 tension and zero. The maximum shear stress at the point will be
• If a machine member is loaded in such a way that the three principal stresses at a point are 600 kg/cm2 tension, 800 kg/cm2 compression and zero. The maximum shear stress at the point will be
• The ratio of maximum shear stress to average shear stress for a circular section is
• In case of biaxial stress system when a member is subjected to tensile stresses in two perpendicular directions the maximum shear stress in case of mild steel occurs on a plane inclined at
• A steel specified as St 50 will have a tensile strength of approximately
• The bursting pressure of 12 mm ID, 14 mm OD seamless cartridge brass tubing having ultimate whear stress of 225 Mpa, will be nearly