When the collector supply is 5V, then collector cut off voltage under dc condition is

Related MCQs

• A transistor amplifier has a voltage gain of 100. If the input voltage is 75 mV, the output voltage is:
• The total decibel voltage gain of two cascaded voltage amplifier where individual voltage gains are 10 and 100 is
• Consider a zener diode with a slope resistance of 10 Ω in series with a 90 Ω resistor fed from a dc supply containing a ripple voltage of 20mV peak-to-peak. Compute for the ripple voltage in load
• Calculate the efficiency of a class B amplifier for a supply voltage of VCC = 20 V with peak output voltage of VL(p) = 18 V. Assume RL = 16 Ω.
• A 35 mV signal is applied to the base of a properly biased transistor with an r'e = 8 Ω and RC = 1 kΩ. The output signal voltage at the collector is:
• An emitter-follower amplifier has an input impedance of 107 kΩ. The input signal is 12 mV. The approximate output voltage is (common-collector)
• What is the ideal maximum voltage gain of a common collector amplifier?
• What is the ratio of the secondary voltage to the primary voltage with the turn ratio in the winding
• Kirchhoff's Voltage Law states that the total voltage around a closed loop must be
• The dc load line on a family of collector characteristic curves of a transistor shows the