The main advantage of a steel member, is:

Related MCQs

• For the steel member exposed to weather and accessible for repainting, the thickness of steel should not be less than (accepting the webs of Indian Standard rolled steel joists and channels).
• For the steel member exposed to weather and accessible for repainting, the thickness of steel should not be less than (accepting the webs of Indian Standard rolled steel joists and channels).
• In a tension member if one or more than one rivet holes are off the line, the failure of the member depends upon:
• A tension member, if subjected to possible reversal of stress due to wind, the slenderness ratio of the member should not exceed
• In a tension member if one or more than one rivet holes are off the line, the failure of the member depends upon:
• A tension member, if subjected to possible reversal of stress due to wind, the slenderness ratio of the member should not exceed
• For a steel member of slenderness ratio 350, the allowable stress is 76 kg/cm2 if it is
• For a steel member of slenderness ratio 350, the allowable stress is 76 kg/cm2 if it is
• The allowable tensile stress in structural mild steel plates for steel tank is assumed as
• For steel members not exposed to weather, the thickness of steel should not be less than