For a steel member of slenderness ratio 350, the allowable stress is 76 kg/cm2 if it is

Related MCQs

• For a steel member of slenderness ratio 350, the allowable stress is 76 kg/cm2 if it is
• If the area of cross-section of a single angle discontinuous strut is 30 cm2 and allowable working stress corresponding to its slenderness ratio is 625 kg/cm2, the safe load carrying capacity of the member, is
• A tension member, if subjected to possible reversal of stress due to wind, the slenderness ratio of the member should not exceed
• A tension member, if subjected to possible reversal of stress due to wind, the slenderness ratio of the member should not exceed
• Allowable working stress corresponding to the slenderness ratio of double angles placed back to back and connected to one side of a gusset plate, is reduced to
• Allowable working stress corresponding to the slenderness ratio of double angles placed back to back and connected to one side of a gusset plate, is reduced to
• The allowable tensile stress in structural mild steel plates for steel tank is assumed as
• For the steel member exposed to weather and accessible for repainting, the thickness of steel should not be less than (accepting the webs of Indian Standard rolled steel joists and channels).
• For the steel member exposed to weather and accessible for repainting, the thickness of steel should not be less than (accepting the webs of Indian Standard rolled steel joists and channels).
• If fbt and fc are the co-existent bending tensile stress and shear stress in a member, the equivalent stress fc is