To generate 8.1 MW under a head of 81m while working at a speed of 540rpm, what type of
turbine is suitable?

Related MCQs

• A Kaplan turbine requires a speed ratio of 2. The available head of the turbine is 5 m. What should be the blade velocity of the turbine such that a speed ratio of 2 is maintained (take g = 10 m/s2)?
• The speed ratio of an impulse turbine operating under a head off 400m is 0.46. The p.c.d of turbine wheel is 22.25m then rotational speed, in rpm is
• In this type of low head turbine, the guide vanes are fixed to the hub of the turbine and are not adjustable. What is this type of turbine called?
• A turbine works at 20 m head and speed of 500 rpm. Its 1:2 scale model to be tested at same head should have a rotational speed of
• The velocity of the flow through the Kaplan turbine is 25 m/s. The available head of the turbine is 60 m. Find the flow ratio of the turbine (take g = 10 m/s2).
• The available head of a Francis Turbine is 120 m. The blade velocity is given 35 m/s. Find the speed ratio of the turbine.
• Specific speed of the turbine is defined as the speed at which the turbine runs when
• The Unit speed is the speed of a turbine when it is working
• In Pelton turbine the ratio of volume available at shaft of turbine and power supplied at the inlet of the turbine is               
• The desired hydraulic efficiency of a turbine is 80% at a whirl velocity of 20 m/s and a head of 100 m. What should be the blade velocity of the turbine at inlet in m/s?