[Solved] The allowable stresses for the design of steel tanks are adopted

McqMate

Q.	The allowable stresses for the design of steel tanks are adopted
A.	80 percent reduced as given in IS : 800
B.	95 percent reduced as given in IS : 800
C.	50 percent reduced as given in IS : 800
D.	Increasing the diameter of threaded portion
E.	as given in IS : 800
Answer» A. 80 percent reduced as given in IS : 800

2.1k

0

Do you find this helpful?

16

View all MCQs in

Discussion

No comments yet

Related MCQs

The basic design stress adopted for the design of light gauge steel members is
If the allowable shear stress is 960 kg/sq. cm for the size h cm, the allowable force per cm of weld length would be
In elevated circular steel tanks, conical bottoms are attached when
In elevated circular steel tanks, hemispherical bottoms are preferred because
The maximum thickness of the plates used in pressed steel tanks is
For determination of allowable stress in axial compression, IS : 800-1962 has adopted
The approximate value of allowable stress for carbon steel under static loading (in kg/cm2) is
A spherical gas tank is made of 1 cm steel plate hemispheres but welded together. The tank is 1503 cm in diameter. The allowable internal pressure to which tank may be subjected is the permissible stress be limited to 840 kg/sq cm would be in the range
In case of biaxial stress system when a member is subjected to tensile stresses in two perpendicular directions the maximum shear stress in case of mild steel occurs on a plane inclined at
The edge of the plates for boilers and tanks are usually bevelled at an angle of 80?