135
81.1k

500+ Engineering Thermodynamics Solved MCQs

Engineering thermodynamics is a branch of engineering that deals with the study of energy, heat, and their relationship to work and the transfer of energy from one place to another.

It is a fundamental subject that forms the basis of many other branches of engineering, including mechanical, chemical, and electrical engineering. The principles of thermodynamics are used to design engines, power plants, refrigeration systems, and a wide variety of other devices and systems that are essential to modern society. Some of the key concepts in engineering thermodynamics include the laws of thermodynamics, entropy, and the concept of equilibrium.

These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Mechanical Engineering .

401.

For getting TdS equations, we assume entropy to be a function of T and V and also of T and p.

A. true
B. false
Answer» A. true
402.

During phase transitions like vaporization, melting and sublimation

A. pressure and temperature remains constant
B. volume and entropy changes
C. both of the mentioned
D. none of the mentioned
Answer» C. both of the mentioned
403.

Which of the following requirement is satisfied by a phase change of the first order?

A. there are changes of volume and entropy
B. the first-order derivative of the gibbs function changes discontinuously
C. both of the mentioned
D. none of the mentioned
Answer» C. both of the mentioned
404.

The vapour pressure p in kPa at

A. p = 101.325 exp (88/r)(1+t/tb)
B. p = 101.325 exp (88/r)(1+tb/t)
C. p = 101.325 exp (88/r)(1-t/tb)
D. p = 101.325 exp (88/r)(1-tb/t)
Answer» D. p = 101.325 exp (88/r)(1-tb/t)
405.

The vapour pressure curve is of the form ln(p) = A + B/T + C*lnT + DT.

A. true
B. false
Answer» A. true
406.

According to Trouton’s rule, the ratio of latent heat of vaporization to the boiling point at 1.013 bar is

A. 77 kj/kgmol k
B. 88 kj/kgmol k
C. 99 kj/kgmol k
D. 100 kj/kgmol k
Answer» B. 88 kj/kgmol k
407.

Estimate the freezing temperature of liquid water at a pressure of 30 MPa.

A. -2.2°c
B. 0°c
C. -0.2°c
D. -1.2°c
Answer» A. -2.2°c
408.

The expression nRT/V is called the partial pressure of a gas.

A. true
B. false
Answer» A. true
409.

The gas constant of the mixture is the   of the gas constants of the components.

A. average
B. weighted mean
C. sum
D. difference of the highest and the lowest
Answer» B. weighted mean
410.

A quantity called partial volume of a component of mixture is used.

A. true
B. false
Answer» A. true
411.

When gases which are at equal pressure and temperature are mixed adiabatically without work, then

A. internal energy of the gaseous system remains constant
B. heat transfer of the gaseous system remains constant
C. entropy of the gaseous system remains constant
D. all of the mentioned
Answer» A. internal energy of the gaseous system remains constant
412.

The fact that internal energy of a mixture is equal to the sum of the partial internal energies of the gases can also be applied to properties like H,Cv,Cp,S,F, and G.

A. true
B. false
Answer» A. true
413.

Which of the following statement is true?

A. the chart is plotted for pressure equal to 760mm hg
B. the constant wbt line represents adiabatic saturation process
C. the constant wbt line coincides with constant enthalpy line
D. all of the mentioned
Answer» D. all of the mentioned
414.

In sensible heating or cooling,

A. work done remains constant
B. dry bulb temperature or air remains constant
C. both of the mentioned
D. none of the mentioned
Answer» A. work done remains constant
415.

Cooling and dehumidification of air is done in summer air conditioning.

A. true
B. false
Answer» A. true
416.

Heating and humidification is done in

A. summer air conditioning
B. winter air conditioning
C. both of the mentioned
D. none of the mentioned
Answer» B. winter air conditioning
417.

Which of the following is an absorbent?

A. silica gel
B. activated alumina
C. both of the mentioned
D. none of the mentioned
Answer» C. both of the mentioned
418.

When air passes through silica gel,

A. it absorbs water vapour molecules
B. latent heat of condensation is released
C. dbt of air increases
D. all of the mentioned
Answer» D. all of the mentioned
419.

In adiabatic evaporative cooling, heat transfer between chamber and surroundings is

A. zero
B. high
C. low
D. none of the mentioned
Answer» A. zero
420.

The cooling tower uses the phenomenon of evaporative cooling to cool warm water above the dbt of air.

A. true
B. false
Answer» B. false
421.

Cooling towers are rated in terms of

A. approach
B. range
C. both of the mentioned
D. none of the mentioned
Answer» C. both of the mentioned
422.

Dry air consists of

A. oxygen, nitrogen
B. carbon dioxide
C. hydrogen, argon
D. all of the mentioned
Answer» D. all of the mentioned
423.

Complete dry air exists in nature.

A. true
B. false
Answer» B. false
424.

Which of the following is true?(here pa=partial pressure of dry air, pw=partial pressure of water vapour, p=atmospheric pressure)

A. p=pw
B. p=pa
C. p=pw + pa
D. all of the mentioned
Answer» C. p=pw + pa
425.

In a mixture of dry air and water vapour,

A. mole fraction of dry air = pa/p
B. mole fraction of water vapour = pw/p
C. both of the mentioned
D. none of the mentioned
Answer» C. both of the mentioned
426.

When pw is very small,

A. saturation temperature of water vapour at pw is less than atmospheric temperature
B. water vapour in air exists in superheated state
C. air is said to be in unsaturated state
D. all of the mentioned
Answer» D. all of the mentioned
427.

Relative humidity is defined as

A. (saturation pressure of pure water) / pw
B. pw / (saturation pressure of pure water)
C. (saturation pressure of pure water) / p
D. p / (saturation pressure of pure water)
Answer» B. pw / (saturation pressure of pure water)
428.

For saturated air, relative humidity is 0%.

A. true
B. false
Answer» B. false
429.

If water is injected into a container with has unsaturated air,

A. water will evaporate
B. moisture content of air will decrease
C. pw will decrease
D. all of the mentioned
Answer» A. water will evaporate
430.

Humidity ratio is given by the ratio of

A. (mass of dry air per unit mass of water vapour)^2
B. 1/(mass of dry air * mass of water vapour)
C. water vapour mass per unit mass of dry air
D. mass of dry air per unit mass of water vapour
Answer» C. water vapour mass per unit mass of dry air
431.

Which of the following statement is true?

A. dew point temperature is the temperature at which water vapour starts condensing
B. dry bulb temperature is recorded by thermometer with dry bulb
C. wet bulb temperature is recorded by thermometer when bulb is covered with a cotton wick which is saturated with water
D. all of the mentioned
Answer» D. all of the mentioned
432.

The wet bulb temperature is the   temperature recorded by moistened bulb.

A. lowest
B. highest
C. atmospheric
D. none of the mentioned
Answer» A. lowest
433.

Air can be cooled and dehumidified by

A. circulating chilled water in tube across air flow
B. placing evaporator coil across air flow
C. spraying chilled water to air
D. all of the mentioned
Answer» D. all of the mentioned
434.

When two equilibrium states are infinitesimally near,

A. dq/t=ds
B. dq/t>ds
C. dq/t<ds
D. none of the mentioned
Answer» A. dq/t=ds
435.

The greater the temperature, the          is the vapour pressure.

A. lower
B. higher
C. depends on the substance
D. none of the mentioned
Answer» B. higher
436.

It is necessary to have a temperature difference to obtain work of any cycle.

A. true
B. false
Answer» A. true
437.

The absolute thermodynamic temperature scale is also known as

A. celsius scale
B. kelvin scale
C. fahrenheit scale
D. none of the mentioned
Answer» B. kelvin scale
438.

In defining the temperature scale, the standard reference point is taken as

A. zero kelvin
B. boiling point of water
C. triple point of water
D. none of the mentioned
Answer» C. triple point of water
439.

When the heat transferred isothermally between the given            decreases, the temperature          

A. isotherms, increases
B. isotherms, decreases
C. adiabatics, increases
D. adiabatics, decreases
Answer» D. adiabatics, decreases
440.

If a system undergoes a reversible isothermal process without transfer of heat, the temperature at which this process takes place is called

A. absolute zero
B. triple point of water
C. boiling point of water
D. none of the mentioned
Answer» A. absolute zero
441.

A definite zero point        on the absolute temperature scale but this point        be reached        violation of the second law.

A. doesnot, can, without
B. exists, cannot, without
C. exists, can, with
D. none of the mentioned
Answer» B. exists, cannot, without
442.

Which law is stated here, “It is impossible to reduce any system to the absolute zero of temperature in a finite number of operations.

A. first law of thermodynamics
B. second law of thermodynamics
C. third law of thermodynamics
D. none of the mentioned
Answer» C. third law of thermodynamics
443.

The statement of third law is also called the Fowler-Guggenheim statement of the third law.

A. true
B. false
Answer» A. true
444.

The Kelvin temperature is numerically equal to the            and may be measured by means of a            

A. gas temperature, liquid thermometer
B. ideal gas temperature, gas thermometer
C. ideal gas temperature, liquid thermometer
D. none of the mentioned
Answer» B. ideal gas temperature, gas thermometer
445.

During a fluid flow, the temperature is developed due to                 

A. increase in density
B. change in pressure
C. translational kinetic energy
D. fluid level
Answer» C. translational kinetic energy
446.

The equation for the average kinetic energy is                   

A. 0.5 kt
B. 1.5 kt
C. 2.5 kt
D. 3.5 kt
Answer» B. 1.5 kt
447.

Entropy occurs due to                

A. change in macroscopic variables
B. volumetric changes only
C. mass changes only
D. temperature only
Answer» A. change in macroscopic variables
448.

Efficiency of a heat engine is defined as

A. total heat output / net work input
B. total heat input / net work output
C. net work output / total heat input
D. net work input / total heat output
Answer» C. net work output / total heat input
449.

A TER which transfers heat to system is called          and one which receives heat is called          

A. source, sink
B. sink, source
C. sink, sink
D. source, source
Answer» A. source, sink
450.

A reversible cycle has following processes.

A. 4 isothermal processes
B. 4 adiabatic processes
C. 2 isothermal and 2 adiabatic processes
D. none of the mentioned
Answer» C. 2 isothermal and 2 adiabatic processes

Done Studing? Take A Test.

Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.