McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Computer Science Engineering (CSE) , Information Technology Engineering (IT) , Bachelor of Science in Computer Science TY (BSc CS) , Bachelor of Science in Information Technology TY (BSc IT) , Bachelor of Science in Information Technology (BSc IT) .
| 401. |
Which of the following is not a part of Performance Testing? |
| A. | measuring transaction rate. |
| B. | measuring response time. |
| C. | measuring the loc. |
| D. | none of the above |
| Answer» C. measuring the loc. | |
| 402. |
Which of the following is the form of Alpha and Beta Testing? |
| A. | acceptance testing |
| B. | system testing |
| C. | unit testing |
| D. | integration testing |
| Answer» A. acceptance testing | |
| 403. |
Which of the following is a myth in testing? |
| A. | tester can find bugs |
| B. | any user can test software |
| C. | missed defects are not due to testers |
| D. | complete testing is not possible |
| Answer» B. any user can test software | |
| 404. |
SDLC stands for ________ |
| A. | software development life cycle |
| B. | system development life cycle |
| C. | software design life cycle |
| D. | system design life cycle |
| Answer» A. software development life cycle | |
| 405. |
Which of the following divides the input domain into classes containing data? |
| A. | equivalent partitioning |
| B. | environment partitioning |
| C. | procedure division |
| D. | compilation division |
| Answer» A. equivalent partitioning | |
| 406. |
-------- is not a Test Document. |
| A. | test policy |
| B. | test case |
| C. | pin ( project initiation note) |
| D. | rtm (requirement traceability matrix) |
| Answer» C. pin ( project initiation note) | |
| 407. |
In TQM , the contributions of quality Guru W. Edward Deming |
| A. | deming’s 14 points |
| B. | deming’s cycle |
| C. | system of profound knowledge |
| D. | all the above |
| Answer» D. all the above | |
| 408. |
TQM culture of quality requirements focuses on |
| A. | product oriented |
| B. | process oriented |
| C. | customer oriented |
| D. | supplier oriented |
| Answer» B. process oriented | |
| 409. |
Maslow says that Human beings are full of needs & wants. And these needs will lead to their? |
| A. | job |
| B. | behavior |
| C. | attitude |
| D. | motivation |
| Answer» B. behavior | |
| 410. |
While setting Quality objective, which need is to be considered. |
| A. | organization need |
| B. | customer need |
| C. | employees need |
| D. | all of the above |
| Answer» B. customer need | |
| 411. |
Kaizen is a – process the purpose of which goes beyond simple productivity improvement. |
| A. | weekly |
| B. | daily |
| C. | monthly |
| D. | annual |
| Answer» B. daily | |
| 412. |
Which of the following are responsible for Quality objective? |
| A. | top level management |
| B. | middle level management |
| C. | frontline management |
| D. | all of the above |
| Answer» A. top level management | |
| 413. |
Which quality management program is related to the maintenance of plants and equipments? |
| A. | environmental management systems |
| B. | fault tree analysis |
| C. | failure mode effect analysis |
| D. | total productive maintenance |
| Answer» D. total productive maintenance | |
| 414. |
ISO 9001 is not concerned with of quality records |
| A. | collection |
| B. | maintenance |
| C. | verification |
| D. | dis-positioning |
| Answer» C. verification | |
| 415. |
The benefits realized by implementing an ISO 14000 quality system are |
| A. | resource benefits, party benefits |
| B. | global benefits, organizational benefits |
| C. | public benefits ,private benefits |
| D. | management benefits, employee benefits |
| Answer» B. global benefits, organizational benefits | |
| 416. |
ISO 14000 standards divided into two area they are |
| A. | organization ,product evaluation standards |
| B. | global , environmental standards |
| C. | management, assessment standards |
| D. | customer, public standards |
| Answer» A. organization ,product evaluation standards | |
| 417. |
What is the purpose of ISO 9001:2008 in QMS? |
| A. | requirement |
| B. | planning |
| C. | documentation |
| D. | verification |
| Answer» A. requirement | |
| 418. |
The two generic ISO standards are |
| A. | iso 9001 & iso 14001 |
| B. | iso 8402 & iso 13999 |
| C. | qs 9000 &ts 16949 |
| D. | none of the above |
| Answer» A. iso 9001 & iso 14001 | |
| 419. |
How can quality be quantified? (Q=Quality, P=Performance, E=Expectations) |
| A. | q=p/e |
| B. | q=p+e |
| C. | q=p-e |
| D. | q=p*e |
| Answer» A. q=p/e | |
| 420. |
Quality control approach focuses on |
| A. | finding and fixing defects |
| B. | creation of of process framework |
| C. | managing quality |
| D. | all of these |
| Answer» A. finding and fixing defects | |
| 421. |
Quality planning at organisational level must be done by |
| A. | people responsible for managing the unit |
| B. | senior management |
| C. | supplier |
| D. | customer |
| Answer» B. senior management | |
| 422. |
Cost required for developing the right product by right method at the first time is called as: |
| A. | cost of manufacturing |
| B. | cost of quality |
| C. | cost of prevention |
| D. | cost of failure |
| Answer» A. cost of manufacturing | |
| 423. |
In ------------ changes in environment is followed by stabilisation |
| A. | continuous improvement |
| B. | continual improvemnet |
| C. | quality control |
| D. | none of these |
| Answer» A. continuous improvement | |
| 424. |
'Big Bang' approach involve testing software system |
| A. | after development work |
| B. | before development work |
| C. | during development work |
| D. | all of these |
| Answer» A. after development work | |
| 425. |
Cost of appraisal represents |
| A. | green money |
| B. | blue money |
| C. | red money |
| D. | none of these |
| Answer» B. blue money | |
| 426. |
Test scenarios are written by |
| A. | developers |
| B. | testers |
| C. | suppliers |
| D. | customers |
| Answer» B. testers | |
| 427. |
Due to existence of a certain defect few more defects are introduced or seen is normally termed as |
| A. | camouflage effect |
| B. | coverage effect |
| C. | cascading effect |
| D. | redundant effect |
| Answer» C. cascading effect | |
| 428. |
Which of the following risk does NOT include product risks in software testing? |
| A. | failure-prone software delivered |
| B. | software that does not perform its intended functions |
| C. | low quality of the design and coding |
| D. | poor data integrity and quality |
| Answer» C. low quality of the design and coding | |
| 429. |
Exit criteria is determined during ______. |
| A. | test closure activity |
| B. | implementation and execution |
| C. | evaluating exit criteria and reporting |
| D. | planning and control |
| Answer» D. planning and control | |
| 430. |
Which of the following is a static test? |
| A. | coverage analysis |
| B. | code inspection |
| C. | usability assessment |
| D. | installation test |
| Answer» B. code inspection | |
| 431. |
Which of the following is not the integration strategy? |
| A. | design based |
| B. | bottom-up |
| C. | big-bang |
| D. | top-down |
| Answer» A. design based | |
| 432. |
Which of the following uses Impact Analysis most? |
| A. | non-functional system testing |
| B. | component testing |
| C. | user acceptance testing |
| D. | maintenance testing |
| Answer» D. maintenance testing | |
| 433. |
What type of review requires formal entry and exit criteria, including metrics? |
| A. | management review |
| B. | inspection |
| C. | walkthrough |
| D. | post project review |
| Answer» B. inspection | |
| 434. |
A deviation from the specified or expected behavior that is visible to end-users is called: |
| A. | an error |
| B. | a fault |
| C. | a failure |
| D. | a defect |
| Answer» C. a failure | |
| 435. |
Unit Tests can detect ________________ |
| A. | regressions |
| B. | quality check |
| C. | database errors |
| D. | enforced error |
| Answer» A. regressions | |
| 436. |
… execute test objects using the automated test scripts. |
| A. | test data preparation tools |
| B. | monitoring tools |
| C. | dynamic analysis tools |
| D. | test execution tools |
| Answer» D. test execution tools | |
| 437. |
… store and manage defects, failure, change requests, or perceived problems and anomalies. |
| A. | requirements management tools |
| B. | test management tools |
| C. | incident management tools |
| D. | configuration management tools |
| Answer» C. incident management tools | |
| 438. |
… helps with identifying inconsistent or missing requirements. |
| A. | requirements management tools |
| B. | test management tools |
| C. | incident management tools |
| D. | configuration management tools |
| Answer» A. requirements management tools | |
| 439. |
… are necessary for storage and version management of testware and related software. |
| A. | requirements management tools |
| B. | test management tools |
| C. | incident management tools |
| D. | configuration management tools |
| Answer» D. configuration management tools | |
| 440. |
… are used to validate software models by enumerating inconsistencies and finding defects. |
| A. | review tools |
| B. | static analysis tools |
| C. | modeling tools |
| D. | test design tools |
| Answer» C. modeling tools | |
| 441. |
… are used in component and component integration testing and when testing middleware. |
| A. | test data preparation tools |
| B. | monitoring tools |
| C. | dynamic analysis tools |
| D. | test execution tools |
| Answer» C. dynamic analysis tools | |
| 442. |
Which is the assertion tests where each server response was received within a given amount of time? |
| A. | duration |
| B. | size |
| C. | xml |
| D. | response |
| Answer» A. duration | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.