Which of the following is economical if depth is limited and loads are too large?

Related MCQs

• Structural members subjected to bending and large axial compressive loads are known as
• Which of the following loads are not considered in the design of gantry girders?
• Members used to carry wall loads over wall openings are called
• Calculate minimum wall thickness given a cylindrical prestressed water tank of internal diameter 30m over a depth of 7.5m and the permissible compressive stress at transfer is 13n/mm2 and the maximum compressive stress under working pressure is 1n/mm2 and the loss ratio is 0.75?
• In the case of large tanks, the base slabs is subdivided by                      
• Determine the length of kennedy key required to transmit 1200N-m and allowable shear in the key is 40N/mm². The diameter of shaft and width of key can be taken as 40mm and 10mm respectively.
• These are important roads within a district connecting areas of production with markets and connecting them with the State Highways & National Highways and are maintained by the State PWD?
• First coat of bituminous painting shall be with stone ballast no.3 and stone grit of 20 mm gauge at 220 kg of asphalt and 1.35 cu m of stone grit per 100 sq. m.
• Which of the following cases for cohesion less backfill in Rankine’s theory is considered?
• Which of the following statement is correct?