McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Civil Engineering .
| 51. |
For a family of 10-15 members, _____ diameter stoneware pipe is sufficient. |
| A. | 8 cm |
| B. | 10 mm |
| C. | 10 cm |
| D. | 12 cm |
| Answer» C. 10 cm | |
| 52. |
In W.C and bathroom the slope of the floor should be towards _____ |
| A. | Gully Trap |
| B. | Nanhi Trap |
| C. | Man hole |
| D. | Waste Pipe |
| Answer» B. Nanhi Trap | |
| 53. |
Variables also known as___ |
| A. | Discrete data |
| B. | Continuous data |
| C. | Both A and B |
| D. | None of the above |
| Answer» B. Continuous data | |
| 54. |
Attributes also known as___ |
| A. | Discrete data |
| B. | Continuous data |
| C. | Both A and B |
| D. | None of the above |
| Answer» A. Discrete data | |
| 55. |
Full form of SQC is____ |
| A. | Statistical Quantity Control |
| B. | Standard Quality Control |
| C. | Statistical Quality Control |
| D. | Standard Quantity Control |
| Answer» C. Statistical Quality Control | |
| 56. |
Which of the following activities are given in SQC techniques. |
| A. | Analyzing data |
| B. | Systematic collection of data |
| C. | Management action |
| D. | All of the above |
| Answer» D. All of the above | |
| 57. |
In a group of similar items, any one item is called___ |
| A. | Universe |
| B. | Unit |
| C. | Variables |
| D. | Attributes |
| Answer» B. Unit | |
| 58. |
A common source from which all units are obtained is called____ |
| A. | Universe |
| B. | Unit |
| C. | Variables |
| D. | Attributes |
| Answer» A. Universe | |
| 59. |
Which of the following benefit is not for SQC. |
| A. | Better quality assurance |
| B. | Not free from sources of variations |
| C. | Reduced inspection cost |
| D. | All of the above |
| Answer» B. Not free from sources of variations | |
| 60. |
Which of the following objectives are for statistical quality control. |
| A. | Reduced inspection cost |
| B. | Better quality assurance |
| C. | To take corrective measure |
| D. | All of the above |
| Answer» D. All of the above | |
| 61. |
Full form of SPC is ____ |
| A. | Standard Process Control |
| B. | Statistical Process Common |
| C. | Statistical Process Control |
| D. | Standard Process Common |
| Answer» C. Statistical Process Control | |
| 62. |
Which of the following objective is not for SPC. |
| A. | Collecting data |
| B. | Controlling of performances |
| C. | Predicting future tendencies |
| D. | None of the above |
| Answer» D. None of the above | |
| 63. |
Why we should refer NBC for. |
| A. | For structural design |
| B. | To know acoustics standards |
| C. | For implementation of building bye laws |
| D. | All of the above |
| Answer» D. All of the above | |
| 64. |
How many parts are consists in to NBC? |
| A. | 10 |
| B. | 11 |
| C. | 12 |
| D. | 13 |
| Answer» A. 10 | |
| 65. |
Which of the following IS code use for masonry construction? |
| A. | IS : 456 Masonry Construction |
| B. | IS : 1905 Masonry Construction |
| C. | IS : 800 Masonry Construction |
| D. | IS : 875 Masonry Construction |
| Answer» B. IS : 1905 Masonry Construction | |
| 66. |
Which of the following standards was focused on quality of product instead of quality of process? |
| A. | British standard |
| B. | Military standard |
| C. | Petroleum standard |
| D. | All of the above |
| Answer» D. All of the above | |
| 67. |
What is the full form ISO is? |
| A. | International Standard Organization |
| B. | Indian Standards Organization |
| C. | International Supply Organization |
| D. | Indian Supply Organization |
| Answer» A. International Standard Organization | |
| 68. |
When was issued ISO 9000 series by ISO? |
| A. | March 1986 |
| B. | March 1987 |
| C. | March 1988 |
| D. | March 1989 |
| Answer» B. March 1987 | |
| 69. |
Which of the following standard is considered good for business practices? |
| A. | ISO 9000 series |
| B. | IS 14000 series |
| C. | Both A and B |
| D. | None of the above |
| Answer» C. Both A and B | |
| 70. |
Which of the following ISO 9000 parts has given general guidelines? |
| A. | ISO 9000 and ISO 9001 |
| B. | ISO 9000 and ISO 9002 |
| C. | ISO 9000 and ISO 9003 |
| D. | ISO 9000 and ISO 9004 |
| Answer» D. ISO 9000 and ISO 9004 | |
| 71. |
Which of the following ISO 9000 parts has applicable to only design control? |
| A. | ISO 9001 |
| B. | ISO 9002 |
| C. | ISO 9003 |
| D. | ISO 9004 |
| Answer» A. ISO 9001 | |
| 72. |
How many elements are covered in ISO 9001 quality system? |
| A. | 19 |
| B. | 13 |
| C. | 20 |
| D. | 15 |
| Answer» C. 20 | |
| 73. |
LEED means___ |
| A. | Leadership in Energy and Environmental Document |
| B. | Leadership in Energy and Environmental Design |
| C. | Leadership in Energy and Efficiency Document |
| D. | Leadership in Energy and Efficiency Design |
| Answer» B. Leadership in Energy and Environmental Design | |
| 74. |
LEED gives rating in form___ |
| A. | Platinum |
| B. | Gold |
| C. | Silver |
| D. | All of the above |
| Answer» D. All of the above | |
| 75. |
GRIHA means that___ |
| A. | Green Rating for Integrated Habital Assessment |
| B. | Green Rating for Information Habital Assessment |
| C. | Green Rating for Indian Habital Assessment |
| D. | Green Rating for International Habital Assessment |
| Answer» A. Green Rating for Integrated Habital Assessment | |
| 76. |
When GRIHA was launched in India? |
| A. | 2001 |
| B. | 2008 |
| C. | 2010 |
| D. | 2011 |
| Answer» B. 2008 | |
| 77. |
GRIHA has been prepared by ___ |
| A. | USGBC |
| B. | TERI |
| C. | LEED |
| D. | None of the above |
| Answer» B. TERI | |
| 78. |
When LEED was launched in india? |
| A. | 2001 |
| B. | 2008 |
| C. | 2010 |
| D. | 2011 |
| Answer» A. 2001 | |
| 79. |
Full name of TERI is___ |
| A. | The Energy and Resources Institute |
| B. | The Energy and Rating Institute |
| C. | The Energy and Resources India |
| D. | The Environmental and Resources Institute |
| Answer» A. The Energy and Resources Institute | |
| 80. |
Full form of IGBC is that___ |
| A. | International Green Building Council |
| B. | International Green Building Control |
| C. | Indian Green Building Council |
| D. | Indian Green Building Control |
| Answer» C. Indian Green Building Council | |
| 81. |
What rating did the Government of India make mandatory for government buildings in 2010? |
| A. | GRIHA - 2 Star |
| B. | GRIHA – 3 Star |
| C. | Gold |
| D. | Platinum |
| Answer» B. GRIHA – 3 Star | |
| 82. |
ADARSH means___ |
| A. | Association for Design and Research of Sustainable Habitas |
| B. | Association for Development and Rating of Sustainable Habitas |
| C. | Association for Development and Research of Sustainable Habitas |
| D. | Association for Design and Rating of Sustainable Habitas |
| Answer» C. Association for Development and Research of Sustainable Habitas | |
| 83. |
__________of a measurement denotes its closeness to another measurement of the same quality |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» B. Precision | |
| 84. |
The capacity of any instrument to take minimum measurement is called its _______ |
| A. | Accuracy |
| B. | Precision |
| C. | Calibration |
| D. | Least count |
| Answer» D. Least count | |
| 85. |
Which one is not sources of errors? |
| A. | Instrumental Errors |
| B. | Personal Errors |
| C. | Calculated Errors |
| D. | Natural Errors |
| Answer» C. Calculated Errors | |
| 86. |
12.3056 number has how many significant figures? |
| A. | 2 |
| B. | 6 |
| C. | 3 |
| D. | 4 |
| Answer» B. 6 | |
| 87. |
Area=(h1+h2+h3+....hn ) d calculated by which method? |
| A. | Mid ordinate rule |
| B. | Average ordinate rule |
| C. | Trapezoidal rule |
| D. | Simpson's rule |
| Answer» A. Mid ordinate rule | |
| 88. |
Area= (h0 +h1 +h2 +h3 +....hn) (n+1) × nd Calculated by which method? |
| A. | Mid ordinate rule |
| B. | Average ordinate rule |
| C. | Trapezoidal rule |
| D. | Simpson's rule |
| Answer» B. Average ordinate rule | |
| 89. |
Which methods are generally adopted for computation of volumes |
| A. | From cross-sections |
| B. | From spot levels |
| C. | From contours |
| D. | All the above |
| Answer» D. All the above | |
| 90. |
The minimum width of the main entrance at residential door shall be _____ |
| A. | 800 mm |
| B. | 900 mm |
| C. | 1000 mm |
| D. | 1200 mm |
| Answer» C. 1000 mm | |
| 91. |
The door / window frame should have ______ horn at the upper side. |
| A. | 10 cm |
| B. | 12 cm |
| C. | 15 cm |
| D. | 20 cm |
| Answer» C. 15 cm | |
| 92. |
In school, hospitals, offices the wall openings shall be atleast _____ of the floor area. |
| A. | 10% |
| B. | 15% |
| C. | 20% |
| D. | 25% |
| Answer» C. 20% | |
| 93. |
A brick dropped flat on the hard ground from a height of ____ should not break. |
| A. | 0.8 m |
| B. | 1.1 m |
| C. | 1.5 m |
| D. | 1.2 m |
| Answer» D. 1.2 m | |
| 94. |
Instrument used for setting out right angles are |
| A. | Cross staff |
| B. | Optical square |
| C. | Prism square |
| D. | All the above |
| Answer» D. All the above | |
| 95. |
Removal of props under beams and arches spanning upto 6 m |
| A. | 7 days |
| B. | 14 days |
| C. | 21 days |
| D. | 28 days |
| Answer» B. 14 days | |
| 96. |
Full form of QCIP |
| A. | Quantity Control Inspection Program |
| B. | Quality Control Inspection Programing |
| C. | Quality Control Ideal Program |
| D. | Quality Control Inspection Program |
| Answer» D. Quality Control Inspection Program | |
| 97. |
Storage of cement bags should be kept______ away from walls. |
| A. | 20 cm |
| B. | 30 cm |
| C. | 40 cm |
| D. | 10 cm |
| Answer» B. 30 cm | |
| 98. |
Bricks absorbing more than _____ water should be rejected |
| A. | 20% |
| B. | 22% |
| C. | 25% |
| D. | 15% |
| Answer» C. 25% | |
| 99. |
Which of the following points has not be covered in ISO 9003 ? |
| A. | Contract review |
| B. | Inspection and testing |
| C. | Quality records |
| D. | None of the above |
| Answer» D. None of the above | |
| 100. |
Which of the following sequences are for the installation of ISO 9000 quality system? |
| A. | Preparatory- Registration and certification -Implementation |
| B. | Preparatory-Implementation-Registration and certification |
| C. | Registration and certification -Preparatory- Implementation |
| D. | Registration and certification –Implementation- Preparatory |
| Answer» B. Preparatory-Implementation-Registration and certification | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.