McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Civil Engineering .
| 101. |
“Centering is used for construction”, is it true or false? |
| A. | true |
| B. | false |
| C. | none |
| D. | all |
| Answer» A. true | |
| 102. |
What is a requirement of good formwork? |
| A. | easy removal |
| B. | economical |
| C. | less leakage |
| D. | all of the above |
| Answer» D. all of the above | |
| 103. |
“Horn is extend part of the head of the door frame”, is it true or false? |
| A. | true |
| B. | false |
| C. | none |
| D. | all |
| Answer» A. true | |
| 104. |
Mullion in door frame used for….. |
| A. | dividing door vertically |
| B. | dividing door horizontally |
| C. | dividing door in inclined direction |
| D. | any one of the above |
| Answer» A. dividing door vertically | |
| 105. |
Sash used for carrying …………. panel. |
| A. | glass |
| B. | wooden |
| C. | metal |
| D. | plastic |
| Answer» A. glass | |
| 106. |
Which one is not a standard size of ventilators? |
| A. | 600 mm × 600 mm |
| B. | 1000 mm × 600 mm |
| C. | 1200 mm × 600 mm |
| D. | 1400 mm × 600 mm |
| Answer» D. 1400 mm × 600 mm | |
| 107. |
Which factor affects the selection of the floorings? |
| A. | initial cost |
| B. | appearance |
| C. | durability |
| D. | all of the above |
| Answer» D. all of the above | |
| 108. |
Which material not used for the flooring? |
| A. | plastic |
| B. | concrete |
| C. | stones |
| D. | bricks |
| Answer» A. plastic | |
| 109. |
“Muram is a fine chips of marble”, is it true or false? |
| A. | true |
| B. | false |
| C. | none |
| D. | all |
| Answer» A. true | |
| 110. |
Pitch of the roof is…… |
| A. | rise of roof |
| B. | span of roof |
| C. | ratio of rise to span |
| D. | none of the above |
| Answer» C. ratio of rise to span | |
| 111. |
North light roof truss used in….. |
| A. | factories |
| B. | workshops |
| C. | warehouses |
| D. | all of the above |
| Answer» D. all of the above | |
| 112. |
“Louvers are provided for better ventilation through a door”, is it true or false? |
| A. | true |
| B. | false |
| C. | none |
| D. | all |
| Answer» A. true | |
| 113. |
“Verge is triangular upper part of the wall formed at the end of the roof”, is it true or false? |
| A. | true |
| B. | false |
| C. | none |
| D. | all |
| Answer» B. false | |
| 114. |
Which is not a type of flat roof? |
| A. | mud terrace roofing |
| B. | king post roof truss |
| C. | lime concrete terracing |
| D. | bangle terrace roofing |
| Answer» B. king post roof truss | |
| 115. |
Which materials not used for the roof covering? |
| A. | shingles |
| B. | tiles |
| C. | slates |
| D. | mud |
| Answer» D. mud | |
| 116. |
Which one is used in AC sheet roof covering? |
| A. | hook bolt |
| B. | L bolt |
| C. | crank bolt |
| D. | all of the above |
| Answer» D. all of the above | |
| 117. |
False ceiling is used for… |
| A. | sound insulation |
| B. | heat insulation |
| C. | reduce headroom |
| D. | all of the above |
| Answer» D. all of the above | |
| 118. |
Which material is not used for in false ceiling? |
| A. | wooden planks |
| B. | plywood |
| C. | slates |
| D. | all of the above |
| Answer» C. slates | |
| 119. |
Which one is not suitable for goof stairs? |
| A. | it should isolate from light and ventilation |
| B. | wide in dimension |
| C. | fire resistance |
| D. | all of the above |
| Answer» A. it should isolate from light and ventilation | |
| 120. |
Which one is not a part of the lift? |
| A. | control room |
| B. | power supply |
| C. | buffer |
| D. | hoist rope |
| Answer» B. power supply | |
| 121. |
Gauging is……. |
| A. | process of mixing various component of plaster |
| B. | applying a plaster |
| C. | prepare a surface for plaster |
| D. | none of the above |
| Answer» D. none of the above | |
| 122. |
“Escalators is suitable for light traffic”, is true or false? |
| A. | true |
| B. | false |
| C. | none |
| D. | all |
| Answer» B. false | |
| 123. |
Which one is cheapest plaster? |
| A. | cement plaster |
| B. | mud plaster |
| C. | lime plaster |
| D. | cement lime plaster |
| Answer» B. mud plaster | |
| 124. |
Which plaster used for the X ray room? |
| A. | POP |
| B. | barium plaster |
| C. | sire pit plaster |
| D. | scagolia plaster |
| Answer» B. barium plaster | |
| 125. |
Flaking in plaster occurs due to…… |
| A. | poor bonding |
| B. | corrosion in metal laths |
| C. | dust trap inside the plaster layers |
| D. | all of the above |
| Answer» A. poor bonding | |
| 126. |
What are causes of dampness? |
| A. | rising of moisture from ground |
| B. | action of rain |
| C. | condensation |
| D. | all of the above |
| Answer» D. all of the above | |
| 127. |
Which material not used for the damp proofing? |
| A. | hot bitumen |
| B. | stones |
| C. | mud |
| D. | mortar |
| Answer» C. mud | |
| 128. |
Concentration of DDT in termite treatment solution is………….. (by weight) |
| A. | 10 % |
| B. | 5 % |
| C. | 12 % |
| D. | 20 % |
| Answer» B. 5 % | |
| 129. |
Which admixture is used for speed up setting in grouting? |
| A. | gypsum |
| B. | clay |
| C. | stone dust |
| D. | calcium chloride |
| Answer» D. calcium chloride | |
| 130. |
Which factor affects the selection of the construction equipment? |
| A. | size of equipment |
| B. | uniformity of type |
| C. | unit cost |
| D. | all of the above |
| Answer» D. all of the above | |
| 131. |
What is proportion mortar for grouting of thin cracks? |
| A. | 1:9 |
| B. | 1:10 |
| C. | 2:7 |
| D. | 1:8 |
| Answer» B. 1:10 | |
| 132. |
Which grouting method used for the shallow depth? |
| A. | consolidation grouting |
| B. | stage grouting |
| C. | curtain grouting |
| D. | all of the above |
| Answer» A. consolidation grouting | |
| 133. |
“Metal laths is work as base of a plaster”, is it true or false? |
| A. | true |
| B. | false |
| C. | none |
| D. | all |
| Answer» A. true | |
| 134. |
Clam shell used for……. |
| A. | excavating soft material |
| B. | trenching work |
| C. | excavate material below water surface |
| D. | all of the above |
| Answer» D. all of the above | |
| 135. |
Bull dozer used for……. |
| A. | clear site of work |
| B. | make the land level |
| C. | prepare pilot roads |
| D. | all of the above |
| Answer» D. all of the above | |
| 136. |
Main use of scraper is………… |
| A. | loosen hard soil |
| B. | leveling of soil |
| C. | trenching work |
| D. | back filling of trenches |
| Answer» B. leveling of soil | |
| 137. |
What is maximum capacity of the scraper? (in cu.m) |
| A. | 9 |
| B. | 18 |
| C. | 25 |
| D. | 30 |
| Answer» A. 9 | |
| 138. |
Which of these is not a favorable condition for working of rippers? |
| A. | faults and fracture in hard surface |
| B. | brittle structure of rock |
| C. | moisture in rock surface |
| D. | large grain size soil |
| Answer» C. moisture in rock surface | |
| 139. |
What is maximum services life of ripper tips? ( in hours) |
| A. | 100 |
| B. | 200 |
| C. | 1000 |
| D. | 4000 |
| Answer» C. 1000 | |
| 140. |
What is normal vibration time in the case of internal vibrator? (in sec.) |
| A. | 10 to 20 |
| B. | 10 to 30 |
| C. | 5 to 20 |
| D. | 10 to 40 |
| Answer» C. 5 to 20 | |
| 141. |
What is the vibration frequency of the surface vibrator? (in cycles per min.) |
| A. | 1000 to 6000 |
| B. | 3000 to 6000 |
| C. | 2000 to 6000 |
| D. | 2500 to 6500 |
| Answer» B. 3000 to 6000 | |
| 142. |
“Drag line used for excavating material below operating level”, is it true or false? |
| A. | true |
| B. | false |
| C. | none |
| D. | all |
| Answer» A. true | |
| 143. |
“Internal vibrators are powered by the steam engine”, is it true or false? |
| A. | true |
| B. | false |
| C. | none |
| D. | all |
| Answer» B. false | |
| 144. |
What are major causes of accident in construction? |
| A. | physical causes |
| B. | physiological causes |
| C. | psychological causes |
| D. | all of the above |
| Answer» D. all of the above | |
| 145. |
Safety measures for excavation given in…….. |
| A. | IS:3764 – 1996 |
| B. | IS:3764 – 1997 |
| C. | IS:3764 – 1992 |
| D. | IS:3764 – 1990 |
| Answer» A. IS:3764 – 1996 | |
| 146. |
Safety measures for erection of steel structure given in…….. |
| A. | IS:3764 – 1996 |
| B. | IS:4764 – 1997 |
| C. | IS:7864 – 1992 |
| D. | IS:8989 – 1978 |
| Answer» D. IS:8989 – 1978 | |
| 147. |
Safety measures for erection of steel structure given in…….. |
| A. | IS:3764 – 1996 |
| B. | IS:4130 – 1976 |
| C. | IS:7864 – 1992 |
| D. | IS:8989 – 1978 |
| Answer» B. IS:4130 – 1976 | |
| 148. |
What are major causes of failure of structure? |
| A. | materials |
| B. | inspection |
| C. | poor maintenance |
| D. | all of the above |
| Answer» D. all of the above | |
| 149. |
Maintenance report contain…….. |
| A. | foundation condition |
| B. | flooring condition |
| C. | condition of woodwork |
| D. | all of the above |
| Answer» D. all of the above | |
| 150. |
Which test used for the testing a pipeline? |
| A. | color water test |
| B. | hydraulic gradient test |
| C. | metal road test |
| D. | all of the above |
| Answer» D. all of the above | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.