72
80.3k

180+ IT in Management Solved MCQs

These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Bachelor of Business Administration (BBA) .

1.

UNIVAC is

A. universal automatic computer
B. universal array computer
C. unique automatic computer
D. unvalued automatic computer
Answer» A. universal automatic computer
2.

The basic operations performed by a computer are

A. arithmetic operation
B. logical operation
C. storage and relative
D. all the above
Answer» D. all the above
3.

The two major types of computer chips are

A. external memory chip
B. primary memory chip
C. microprocessor chip
D. both b and c
Answer» D. both b and c
4.

Microprocessors as switching devices are for which generation computers

A. first generation
B. second generation
C. third generation
D. fourth generation
Answer» D. fourth generation
5.

ASCII and EBCDIC are the popular character coding systems. What does EBCDIC stand for?

A. extended binary coded decimal interchange code
B. extended bit code decimal interchange code
C. extended bit case decimal interchange code
D. extended binary case decimal interchange code
Answer» A. extended binary coded decimal interchange code
6.

Storage capacity of magnetic disk depends on

A. tracks per inch of surface
B. bits per inch of tracks
C. disk pack in disk surface
D. all of above
Answer» D. all of above
7.

The two kinds of main memory are:

A. primary and secondary
B. random and sequential
C. rom and ram
D. all of above
Answer» C. rom and ram
8.

A storage area used to store data to a compensate for the difference in speed at which the different units can handle data is

A. memory
B. buffer
C. accumulator
D. address
Answer» B. buffer
9.

Computer is free from tiresome and boardoom. We call it

A. accuracy
B. reliability
C. diligence
D. versatility
Answer» C. diligence
10.

Integrated Circuits (Ics) are related to which generation of computers?

A. first generation
B. second generation
C. third generation
D. fourth generation
Answer» C. third generation
11.

CD-ROM is a

A. semiconductor memory
B. memory register
C. magnetic memory
D. none of above
Answer» D. none of above
12.

Which type of computers uses the 8-bit code called EBCDIC?

A. minicomputers
B. microcomputers
C. mainframe computers
D. super computer
Answer» C. mainframe computers
13.

The ALU of a computer responds to the commands coming from

A. primary memory
B. control section
C. external memory
D. cache memory
Answer» B. control section
14.

Chief component of first generation computer was

A. transistors
B. vacuum tubes and valves
C. integrated circuits
D. none of above
Answer» B. vacuum tubes and valves
15.

To produce high quality graphics (hardcopy) in color, you would want to use a/n

A. rgb monitor
B. plotter
C. ink-jet printer
D. laser printer
Answer» B. plotter
16.

What are the stages in the compilation process?

A. feasibility study, system design and testing
B. implementation and documentation
C. lexical analysis, syntax analysis, and code generation
D. none of the above
Answer» C. lexical analysis, syntax analysis, and code generation
17.

Which of the following IC was used in third generation of computers?

A. ssi
B. msi
C. lsi
D. both a and b
Answer» D. both a and b
18.

The main electronic component used in first generation computers was

A. transistors
B. vacuum tubes and valves
C. integrated circuits
D. none of above
Answer» B. vacuum tubes and valves
19.

A dumb terminal has

A. an embedded microprocessor
B. extensive memory
C. independent processing capability
D. a keyboard and screen
Answer» D. a keyboard and screen
20.

One millisecond is

A. 1 second
B. 10th of a seconds
C. 1000th of a seconds
D. 10000th of a seconds
Answer» C. 1000th of a seconds
21.

The output quality of a printer is measured by

A. dot per sq. inch
B. dot per inch
C. dots printed per unit time
D. all of the above
Answer» A. dot per sq. inch
22.

Which of the following was a special purpose computer?

A. abc
B. eniac
C. edvac
D. all of the above
Answer» A. abc
23.

What was the computer invented by Attanasoff and Clifford?

A. mark i
B. abc
C. z3
D. none of above
Answer» B. abc
24.

Which of the following storage devices can store maximum amount of data?

A. floppy disk
B. hard disk
C. compact disk
D. magneto optic disk
Answer» B. hard disk
25.

Which computer was considered the first electronic computer until 1973 when court invalidated the patent?

A. eniac
B. mark i
C. z3
D. abc
Answer» A. eniac
26.

A physical connection between the microprocessor memory and other parts of the microcomputer is known as

A. path
B. address bus
C. route
D. all of the above
Answer» B. address bus
27.

High density double sided floppy disks could store _____ of data

A. 1.40 mb
B. 1.44 gb
C. 1.40 gb
D. 1.44 mb
Answer» D. 1.44 mb
28.

A high quality CAD system uses the following for printing drawing and graphs

A. dot matrix printer
B. digital plotter
C. line printer
D. all of the above
Answer» B. digital plotter
29.

Which of the following is not an input device?

A. ocr
B. optical scanners
C. voice recognition device
D. com (computer output to microfilm)
Answer» D. com (computer output to microfilm)
30.

The accuracy of the floating-point numbers representable in two 16-bit words of a computer is approximately

A. 16 digits
B. 6 digits
C. 9 digits
D. all of above
Answer» B. 6 digits
31.

In most IBM PCs, the CPU, the device drives, memory expansion slots and active components are mounted on a single board. What is the name of this board?

A. motherboard
B. breadboard
C. daughter board
D. grandmother board
Answer» A. motherboard
32.

Magnetic disks are the most popular medium for

A. direct access
B. sequential access
C. both of above
D. none of above
Answer» C. both of above
33.

A technique used by codes to convert an analog signal into a digital bit stream is known as

A. pulse code modulation
B. pulse stretcher
C. query processing
D. queue management
Answer» A. pulse code modulation
34.

Regarding a VDU, Which statement is more correct?

A. it is an output device
B. it is an input device
C. it is a peripheral device
D. it is hardware item
Answer» C. it is a peripheral device
35.

A modern electronic computer is a machine that is meant for

A. doing quick mathematical calculations
B. input, storage, manipulation and outputting of data
C. electronic data processing
D. performing repetitive tasks accurately
Answer» B. input, storage, manipulation and outputting of data
36.

When was vacuum tube invented?

A. 1900
B. 1906
C. 1910
D. 1880
Answer» B. 1906
37.

Which of the following produces the best quality graphics reproduction?

A. laser printer
B. ink jet printer
C. plotter
D. dot matrix printer
Answer» C. plotter
38.

Computers with 80286 microprocessor is

A. xt computer
B. at comptuers
C. ps/2 computer
D. none of above
Answer» B. at comptuers
39.

An application suitable for sequential processing is

A. processing of grades
B. payroll processing
C. both a and b
D. all of above
Answer» C. both a and b
40.

Which of the following is not processing?

A. arranging
B. manipulating
C. calculating
D. gathering
Answer» D. gathering
41.

The digital computer was developed primarily in

A. ussr
B. japan
C. usa
D. uk
Answer» C. usa
42.

Software in computer

A. enhances the capabilities of the hardware machine
B. increase the speed of central processing unit
C. both of above
D. none of above
Answer» A. enhances the capabilities of the hardware machine
43.

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify?

A. track number
B. sector number
C. surface number
D. all of above
Answer» D. all of above
44.

The arranging of data in a logical sequence is called

A. sorting
B. classifying
C. reproducing
D. summarizing
Answer» A. sorting
45.

What is the responsibility of the logical unit in the CPU of a computer?

A. to produce result
B. to compare numbers
C. to control flow of information
D. to do math’s works
Answer» B. to compare numbers
46.

Abacus was the first

A. electronic computer
B. mechanical computer
C. electronic calculator
D. mechanical calculator
Answer» D. mechanical calculator
47.

If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be

A. 216
B. 65,536
C. 64k
D. any of the above
Answer» B. 65,536
48.

The terminal device that functions as a cash register, computer terminal, and OCR reader is the:

A. data collection terminal
B. ocr register terminal
C. video display terminal
D. pos terminal
Answer» D. pos terminal
49.

A set of flip flops integrated together is called ____

A. counter
B. adder
C. register
D. none of the above
Answer» C. register
50.

People often call ______ as the brain of computer system

A. control unit
B. arithmetic logic unit
C. central processing unit
D. storage unit
Answer» C. central processing unit

Done Studing? Take A Test.

Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.