

McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Civil Engineering .
201. |
The depth of jambs is |
A. | 57 mm to 76 mm |
B. | 76 mm to 114 mm |
C. | 114 mm to 138 mm |
D. | 138 mm to 152 mm |
Answer» A. 57 mm to 76 mm |
202. |
A course of stone masonry provided immediately above the cornice, is called |
A. | blocking course |
B. | coping |
C. | frieze |
D. | parapet |
Answer» A. blocking course |
203. |
When heavy structural loads from columns are required to be transferred to a soil of low bearing capacity, the most economical foundation is |
A. | shallow foundation |
B. | deep foundation |
C. | raft foundation |
D. | grillage foundation |
Answer» D. grillage foundation |
204. |
The arrangement of bricks is similar to English bond in |
A. | raking bond |
B. | dutch bond |
C. | facing bond |
D. | heading bond |
Answer» D. heading bond |
205. |
The exterior angle or corner of a wall is known as quoin. |
A. | Right |
B. | Wrong |
Answer» A. Right |
206. |
A flexible material used for D.P.C. is |
A. | bitumen sheeting |
B. | plastic sheeting |
C. | mastic asphalt |
D. | cement concrete |
Answer» A. bitumen sheeting |
207. |
The vertical distance between the springing line and the highest point on the intrados is called |
A. | depth |
B. | rise |
C. | haunch |
D. | extrados |
Answer» B. rise |
208. |
The piles which do not support the load by themselves, but act as a medium to transmit the load from the foundation to the resisting sub-stratum, are known as |
A. | friction piles |
B. | bearing piles |
C. | batter piles |
D. | compaction piles |
Answer» B. bearing piles |
209. |
In the pre-cast reinforced concrete piles, the thickness of concrete covering the main bars should not be less than |
A. | 40 mm |
B. | 55 mm |
C. | 75 mm |
D. | 100 mm |
Answer» A. 40 mm |
210. |
The width of jambs is |
A. | 57 mm to 76 mm |
B. | 76 mm to 114 mm |
C. | 114 mm to 138 mm |
D. | 138 mm to 152 mm |
Answer» B. 76 mm to 114 mm |
211. |
A screw pile consists of cast iron or steel shaft of external diameter varying from |
A. | 0 to 150 mm |
B. | 150 to 300 mm |
C. | 300 to 450 mm |
D. | 450 to 600 mm |
Answer» B. 150 to 300 mm |
212. |
The slump commonly adopted for concrete for road works is |
A. | 12 to 25 |
B. | 20 to 28 |
C. | 25 to 50 |
D. | 50 to 100 |
Answer» B. 20 to 28 |
213. |
A steel pile which function more efficiently in soft clay or loose sand, is |
A. | H-pile |
B. | pipe pile |
C. | screw pile |
D. | disc pile |
Answer» C. screw pile |
214. |
When a veavy structure is to be constructed in sandy soil, the foundation used is |
A. | pier foundation |
B. | strap foundation |
C. | raft foundation |
D. | any one of these |
Answer» A. pier foundation |
215. |
High alumina cement is |
A. | made by fusing together a mixture of lime-stone and bauxite |
B. | highly resistant to heat, chemical and other corrosive acids |
C. | used for structures subjected to the action of sea water |
D. | all of the above |
Answer» D. all of the above |
216. |
The moulding provided under nosing to beautify the elevation of a step of stair, is called |
A. | flier |
B. | soffit |
C. | scotia |
D. | tread |
Answer» C. scotia |
217. |
A stretcher bond is usually used for |
A. | half brick wall |
B. | one brick wall |
C. | one and half brick wall |
D. | two brick wall |
Answer» A. half brick wall |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.