256
90.8k

790+ Building Materials Solved MCQs

These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Civil Engineering .

451.

The most valuable timber may be obtained from

A. Chir
B. Shishum
C. Sal
D. Teak
Answer» D. Teak
452.

Mastic asphalt is

A. Acid resisting material
B. Non-corrosive material
C. Corrosive material
D. Heating-resisting material
Answer» B. Non-corrosive material
453.

For lime concrete,

A. Slump is 50 to 75 mm
B. Flexural strength at 90 days is 0.2 N/mm2
C. Compressive strength at 90 days is 1.5 N/mm2
D. All the above
Answer» D. All the above
454.

The material generally not used as extender in paints, is

A. Powdered silica
B. Gypsum
C. Talc
D. Zinc white
Answer» D. Zinc white
455.

Pick up the non-inflammable plastic from the following:

A. Cellulose acetate plastics
B. Polyvinyl chloride plastics
C. Phenol formaldehyde plastic
D. Urea formaldehyde plastic
Answer» B. Polyvinyl chloride plastics
456.

For light and ornamental casting, the most unsuitable pig iron, is

A. Bessemer pig
B. Grey or foundry pig
C. White or forge pig
D. Mottled pig
Answer» D. Mottled pig
457.

If the ore impurities is

A. Clay, lime stone is used as flux
B. Lime stone, clay is used as flux
C. Quartz, lime stone and argillaceous iron ores are used as flux
D. All the above
Answer» D. All the above
458.

The plastics prepared from Vinyl resin are

A. Odourless
B. Non-toxic
C. Transparent
D. All of these
Answer» D. All of these
459.

A rock contains only one mineral. It is called

A. Homogeneous
B. Non-homogeneous
C. Monomineralic
D. Polymineralic
Answer» C. Monomineralic
460.

Pegmatite is a/an

A. Intrusive igneous rock
B. Extrusive igneous rock
C. Sedimentary rock
D. Metamorphic rock
Answer» A. Intrusive igneous rock
461.

Dorry's testing machine is used for

A. Crushing test of stone
B. Hardness test of stone
C. Impact test of stone
D. Water absorption test
Answer» B. Hardness test of stone
462.

Dolomite is a lime stone which contains carbonate of magnesia upto

A. 15 %
B. 20 %
C. 25 %
D. 45 %
Answer» D. 45 %
463.

The portion of the brick cut across its width and having its length equal to that of a full brick, is known as

A. Closer
B. Queen closer
C. King closer
D. Prince closer
Answer» B. Queen closer
464.

The minimum percentage of silica, alumina and ferric oxide in lime for white washing, is

A. 20
B. 15
C. 5
D. 0
Answer» D. 0
465.

For a 50 kg cement bag water required, is

A. 16.5 litres
B. 18.5 litres
C. 20.5 litres
D. 22.5 litres
Answer» D. 22.5 litres
466.

Slump test for concrete is carried out, to determine

A. Strength
B. Durability
C. Workability
D. Water content
Answer» C. Workability
467.

The frog of a brick is normally made on its

A. Top face
B. Bottom face
C. Longer face
D. Shorter side
Answer» A. Top face
468.

Granite mainly composed of quartz and feldspar particles, is obtained from

A. Sedimentary rocks
B. Metamorphic rocks
C. Igneous rocks
D. All the above
Answer» C. Igneous rocks
469.

Pig iron obtained from the furnace which is properly provided with fuel at a very high temperature, is called

A. Bessemer pig
B. Grey or foundry pig
C. White or forge pig
D. Mottled pig
Answer» B. Grey or foundry pig
470.

Pick up the metal refractory from the following:

A. Molybdenum
B. Tungsten
C. Zirconium
D. All of these
Answer» D. All of these
471.

With storage, strength of cement

A. Increases
B. Decreases
C. Remains the same
D. None to these
Answer» B. Decreases
472.

The commonly used raw material in the manufacture of cement, is

A. Slate
B. Sand stone
C. Lime stone
D. Basalt
Answer» C. Lime stone
473.

The rocks formed from molten magma, are called

A. Sedimentary rocks
B. Igneous rocks
C. Metamorphic rocks
D. None of these
Answer» B. Igneous rocks
474.

Bitumen paints offer

A. Pleasing surface
B. Hard surface
C. Smooth surface
D. Protective surface
Answer» D. Protective surface
475.

Ground glass

A. Is made by grinding its one side
B. Is made by melting powdered glass paints surface
C. Is used for getting light without transparency
D. All the above
Answer» D. All the above
476.

The wedging is adopted for quarrying costly stratified rock such as

A. Laterite
B. Marble
C. Limestone
D. All the above
Answer» D. All the above
477.

The colour of statuary marble used for sculptor's work, is

A. Red
B. Blue
C. White
D. Green
Answer» C. White
478.

In a mortar, the binding material is

A. cement
B. sand
C. surkhi
D. Cinder.
Answer» A. cement
479.

Wrought iron contains carbon up to

A. 0.25%
B. 1.0%
C. 1.5%
D. 2%.
Answer» A. 0.25%
480.

Ultimate strength to cement is provided by

A. Tricalcium silicate
B. Di-calcium silicate
C. Tri-calcium aluminate
D. Tetra calcium alumino ferrite.
Answer» B. Di-calcium silicate
481.

The initial setting time of lime-pozzolana, is

A. 30 minutes
B. 60 minutes
C. 90 minutes
D. 120 minutes.
Answer» D. 120 minutes.
482.

The clay to be used for manufacturing for bricks is dugout and allowed to weather in

A. the monsoon
B. the winter
C. the summer
D. none of these
Answer» A. the monsoon
483.

Quartzite is a

A. metamorphic rock
B. argillaceous rock
C. calcareous rock
D. Silicious rock.
Answer» D. Silicious rock.
484.

Pick up the hypabyssal rock from the following

A. Granite
B. Dolerite
C. Basalt
D. All the above.
Answer» B. Dolerite
485.

Depending on the chemical composition and mechanical properties, iron classified as

A. cast iron
B. wrought iron
C. steel
D. all the above.
Answer» D. all the above.
486.

The main constituent of fly-ash, is

A. aluminum oxide
B. silica
C. ferrous oxide
D. All of these.
Answer» D. All of these.
487.

Bitumen in

A. solid state, is called asphalt
B. semi fluid state, is called mineral tar
C. fluid state, is called petroleum
D. All the above.
Answer» D. All the above.
488.

The plastics made from cellulose resin

A. are as clear as glass
B. are tough and strong
C. possess excellent electrical properties
D. All the above.
Answer» D. All the above.
489.

The rocks in which argil (or clay) predominates, are called

A. sillicious rocks
B. argillaceous rocks
C. calcareous rocks
D. Igneous rocks.
Answer» A. sillicious rocks
490.

A badly mixed cement concrete results in

A. segregation
B. bleeding
C. honey combing
D. None to these.
Answer» C. honey combing
491.

Chemically, marble is known as

A. metamorphic rock
B. argillaceous rock
C. calcareous rock
D. silicious rock.
Answer» C. calcareous rock
492.

Inner part of a timber log surrounding the pith, is called

A. sapwood
B. cambium layer
C. heart wood
D. none to these.
Answer» C. heart wood
493.

Refractory bricks are used for

A. retaining walls
B. columns
C. piers
D. Combustion chambers.
Answer» D. Combustion chambers.
494.

Expanded metal is

A. manufactured from steel sheets
B. used for reinforced concrete in road pavements
C. measured in term of SWM (shortway mesh) and LWM (long way mesh)
D. All the above.
Answer» D. All the above.
495.

A piece of sawn timber whose cross-sectional dimensions exceed 5 cm, in one direction and 20 cm in the other direction, is called a

A. cant
B. deal
C. baulk
D. strip.
Answer» C. baulk
496.

Quick lime (or caustic lime)

A. is obtained by the calcination of pure lime stone
B. has great affinity to moisture
C. is amorphous
D. All the above.
Answer» D. All the above.
497.

Pick up the correct statement from the following

A. soft stones are required for carving
B. light stones are required for arches
C. hard stones are required to stand high pressure
D. All the above.
Answer» D. All the above.
498.

Name the type of cement from the following for canal linings

A. sulphate resisting cement
B. rapid hardening cement
C. quick setting cement
D. Pozzuolana cement.
Answer» A. sulphate resisting cement
499.

Mastic asphalt is generally used for

A. damp proof course
B. water proof layer
C. partition walls
D. both (a) and (b).
Answer» D. both (a) and (b).
500.

The most fire resistant paints are

A. enamel paints
B. aluminum paints
C. asbestos paints
D. Cement paints.
Answer» C. asbestos paints

Done Studing? Take A Test.

Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.