McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Bachelor of Pharmacy (B. Pharma) , Pharmacy .
Chapters
| 1. |
Flocculated suspensions exhibit the flow of a type: |
| A. | Dilatant |
| B. | Newtonian |
| C. | Plastic |
| D. | Pseudoplastic |
| Answer» C. Plastic | |
| 2. |
A limitation that is NOT related to the falling sphere viscometer: |
| A. | Applicable to only less viscous liquids |
| B. | Large volume of sample is required |
| C. | Needs the sample to be transparent |
| D. | Plug flow |
| Answer» D. Plug flow | |
| 3. |
In general, Newtonian fluids are expressed in terms of viscosity. A corresponding expression in nonNewtonian fluids (in terms of viscosity) is: |
| A. | apparent |
| B. | dynamic |
| C. | intrinsic |
| D. | kinematic |
| Answer» A. apparent | |
| 4. |
One of the following is NOT a one point viscometer, but can be used for the same purpose. Pick the viscometer of this type. |
| A. | cup and bob |
| B. | falling sphere |
| C. | Ostwald |
| D. | rolling ball |
| Answer» A. cup and bob | |
| 5. |
Fluidity is a term associated with newtoniam fluids. An equivalent term in plastic flow fluids is: |
| A. | apparent viscosity |
| B. | flexibility |
| C. | mobility |
| D. | plastic viscosity |
| Answer» C. mobility | |
| 6. |
Dilatant flow is characterized as a reverse phenomenon of: |
| A. | newtoniam flow |
| B. | plastic flow |
| C. | pseudoplastic flow |
| D. | rheopexy |
| Answer» C. pseudoplastic flow | |
| 7. |
Deflocculated suspension with high concentration of the dispersed solids exhibits the flow of type: |
| A. | dilatant |
| B. | newtoniam |
| C. | plastic |
| D. | pseudoplastic |
| Answer» A. dilatant | |
| 8. |
In antithixotropy, the down-curve is frequently positioned to: (with respect to up-curve): |
| A. | left. |
| B. | origin |
| C. | right |
| D. | superimposible |
| Answer» C. right | |
| 9. |
At equilibrium, the thixotropic behavior of a pseudoplastic system exhibit the state of: |
| A. | gel |
| B. | paste |
| C. | sol |
| D. | wax |
| Answer» C. sol | |
| 10. |
Which one of the following physical Property is NOT a rheological property? |
| A. | body and slip |
| B. | spreadability |
| C. | surface tension |
| D. | viscosity |
| Answer» C. surface tension | |
| 11. |
The pseudoplastic flow behavior can be explained by: |
| A. | apparent viscosity |
| B. | area of hysteresis loop |
| C. | hysteresis loop |
| D. | yield value |
| Answer» A. apparent viscosity | |
| 12. |
Brookfield viscometer is an example of type: |
| A. | cone and plate |
| B. | extrusion |
| C. | rotation sphere |
| D. | rotating spindle |
| Answer» D. rotating spindle | |
| 13. |
High viscosity indicates one of the following relationships in a system. Which is relevant? |
| A. | free from intermolecular interactions |
| B. | intermolecular attractions are stronger |
| C. | intermolecular attractions are weaker |
| D. | shape of the molecules is spherical |
| Answer» B. intermolecular attractions are stronger | |
| 14. |
An emulsion of o/w type has the viscosity: |
| A. | greater than that of the internal phase |
| B. | greater than that of the vehicle |
| C. | less than that of the internal phase |
| D. | less than that of the vehicle |
| Answer» A. greater than that of the internal phase | |
| 15. |
Creep testing is applied to analyse the viscoelastic property of: |
| A. | emulsions |
| B. | lotions |
| C. | ointments |
| D. | suspensions |
| Answer» C. ointments | |
| 16. |
The system that undergoes gel-to-sol transformation is known as: |
| A. | elastic |
| B. | permanent deformation |
| C. | shear thickening |
| D. | shear thinning |
| Answer» D. shear thinning | |
| 17. |
The type of viscosity specified in I.P. (Ostwald viscometer) is: |
| A. | absolute viscosity |
| B. | dynamic viscosity |
| C. | kinematic viscosity |
| D. | viscosity coefficient |
| Answer» C. kinematic viscosity | |
| 18. |
After giving the i.m. injection of procaine penicillin G, the process of forming a depot in the muscle is due to: |
| A. | high yield value |
| B. | low consistency |
| C. | low yield value |
| D. | rapid thixotropic recovery |
| Answer» D. rapid thixotropic recovery | |
| 19. |
Pick the reason for the calibration of an instrument. |
| A. | most of the instruments are not reliable |
| B. | to calculate the constant for the instrument |
| C. | to calculate the relative property |
| D. | to correct the errors in the working of an instrument |
| Answer» D. to correct the errors in the working of an instrument | |
| 20. |
Plug flow in NOT observed in cone and plate viscometer. The reason is: |
| A. | cleaning and filling of sample is easy |
| B. | rate of shear is independent of the radius |
| C. | shear can be maintained uniformly |
| D. | temperature can be maintained uniformly |
| Answer» C. shear can be maintained uniformly | |
| 21. |
The term rheology was invented by |
| A. | Bingham and Crawford |
| B. | Newton |
| C. | Michaelis and Menten |
| D. | Watson and Crick |
| Answer» A. Bingham and Crawford | |
| 22. |
According to the Newton's law of viscosity, "The shear stress in flowing fluid is__________ to the rate of shear." |
| A. | Inversely proportional |
| B. | directly proportional |
| C. | Square root |
| D. | Perpendicular |
| Answer» B. directly proportional | |
| 23. |
The unit of viscosity is |
| A. | Newton sec m-2 |
| B. | Newton sec2 m2 |
| C. | Newton sec-1 m-1 |
| D. | Newton |
| Answer» A. Newton sec m-2 | |
| 24. |
Fluidity is |
| A. | reciprocal of density |
| B. | reciprocal of surface tension |
| C. | reciprocal of volume |
| D. | reciprocal of viscosity |
| Answer» D. reciprocal of viscosity | |
| 25. |
Kinematic viscosity is the ratio of dynamic viscosity to the____________ |
| A. | density of the fluid |
| B. | plastic viscosity |
| C. | volume of liquid to flow |
| D. | specific gravity of fluid |
| Answer» A. density of the fluid | |
| 26. |
The effect of temperature on the viscosity (η) of a liquid is expressed by |
| A. | Stoke's Law |
| B. | Newton's law |
| C. | Arrhenius equation |
| D. | Michaelis Menten equation |
| Answer» C. Arrhenius equation | |
| 27. |
The reciprocal of mobility is known as |
| A. | Apparent viscosity |
| B. | plastic viscosity |
| C. | Dynamic viscosity |
| D. | Kinematic viscosity |
| Answer» B. plastic viscosity | |
| 28. |
Pseudoplastic flow are also known as |
| A. | shear thinning system |
| B. | shear thickening system |
| C. | Elastic deformation |
| D. | Plastic deformation |
| Answer» A. shear thinning system | |
| 29. |
Dilatant flow is also known as |
| A. | shear thinning system |
| B. | shear thickening system |
| C. | Elastic deformation |
| D. | Plastic deformation |
| Answer» B. shear thickening system | |
| 30. |
Negative Thixotropy is a phenomenon in which there is |
| A. | increase in viscosity on down curve |
| B. | increase in viscosity on up curve |
| C. | decrease in viscosity on down curve |
| D. | decrease in viscosity on up curve |
| Answer» A. increase in viscosity on down curve | |
| 31. |
Which of the following is not a viscometers |
| A. | Capillary |
| B. | Falling Sphere |
| C. | Rotational |
| D. | Drop weight |
| Answer» D. Drop weight | |
| 32. |
Which of the following viscometer is also called suspended-level viscometer |
| A. | Ubbelohde viscometer |
| B. | Capillary viscometer |
| C. | Ostwald viscometer |
| D. | Cone and plate viscometer |
| Answer» A. Ubbelohde viscometer | |
| 33. |
Pseudoplastic flow is generally exhibited by |
| A. | Jellies |
| B. | Suspension |
| C. | Lotion |
| D. | Colloids |
| Answer» A. Jellies | |
| 34. |
Concentrated solid suspension generally exhibit |
| A. | Dilatant flow |
| B. | Pseudoplastic flow |
| C. | Plastic flow |
| D. | All of the above |
| Answer» C. Plastic flow | |
| 35. |
Rheology is the |
| A. | Science or study of the flow of a material. |
| B. | Study of particle size |
| C. | Study of formation of colloids |
| D. | Study of formation of complex |
| Answer» A. Science or study of the flow of a material. | |
| 36. |
The change in velocity between two planes of liquid which is separated by distance is called |
| A. | Rate of shear |
| B. | Shearing stress |
| C. | Strain |
| D. | Yield value |
| Answer» A. Rate of shear | |
| 37. |
Which of the following viscometer is based on the principle of Stokes' Law. |
| A. | Cup and Bob viscometer |
| B. | Falling Sphere Viscometer |
| C. | Cone and plate viscometer |
| D. | Rotational viscometer |
| Answer» B. Falling Sphere Viscometer | |
| 38. |
The resistance of a liquid to flow is termed as |
| A. | Viscosity |
| B. | Density |
| C. | In ter facial tension |
| D. | Surface tension |
| Answer» A. Viscosity | |
| 39. |
A shear stress-shear rate relationship is generally explained in the form of curve i.e. or……… |
| A. | Rheogram |
| B. | Consistency curve |
| C. | Both of the above |
| D. | None of the above |
| Answer» C. Both of the above | |
| 40. |
The cgs physical unit for kinematic viscosity is ............... |
| A. | Stokes (St) |
| B. | Pascale (PS) |
| C. | Newton |
| D. | None of the above |
| Answer» A. Stokes (St) | |
| 41. |
As the temperature increases, the viscosity of liquid............... |
| A. | Decreases |
| B. | Increases |
| C. | Sustainly increases |
| D. | Remains constant |
| Answer» A. Decreases | |
| 42. |
The curve for a pseudo plastic material rheogram................ |
| A. | starts at the origin |
| B. | starts at the top |
| C. | both of the above |
| D. | none of the above |
| Answer» A. starts at the origin | |
| 43. |
In psedoplastic flow as shear stress increases, shear rate............... |
| A. | Increases |
| B. | Increases but linear |
| C. | Increases but not linear |
| D. | Decreases |
| Answer» C. Increases but not linear | |
| 44. |
Dilatant materials are frequently called as............... |
| A. | strain-thinning systems |
| B. | shear-thickening systems |
| C. | shear-thinning systems |
| D. | strain-thinning systems |
| Answer» B. shear-thickening systems | |
| 45. |
The Rheogram of thixotropic material determined by................... |
| A. | Duration through which sample is exposed to any one shear rate. |
| B. | Rate at which shear increased or decreased. |
| C. | Both of the above |
| D. | None of the above |
| Answer» C. Both of the above | |
| 46. |
....... is the isothermal and moderately slow recovery on standing of material of which stability lost owing to shearing. |
| A. | Thermochemistry |
| B. | Viscosity |
| C. | Entiotropy |
| D. | Thixotropy |
| Answer» D. Thixotropy | |
| 47. |
......is the alteration in the shape and the size of a body owing to applied external forces and internal forces. |
| A. | Deformation |
| B. | Formation |
| C. | Conjugation |
| D. | None of the above |
| Answer» A. Deformation | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.