McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Civil Engineering , Mechanical Engineering .
Chapters
| 101. |
The flow in venturi flume takes place at |
| A. | Atmospheric pressure |
| B. | Vacuum |
| C. | High pressure |
| D. | Varying pressure |
| E. | None of the above |
| Answer» A. Atmospheric pressure | |
| 102. |
Chemically inact relatively unstable blocks, large or small with three or more sets of joints and seams are known as |
| A. | Moderately jointed rocks |
| B. | Crushed rocks |
| C. | Schistos rocks |
| D. | Chemical rocks |
| E. | Block or seamy rocks |
| Answer» E. Block or seamy rocks | |
| 103. |
A Founeyron turbine is |
| A. | Outward flow reaction turbine |
| B. | Inward flow reaction turbine |
| C. | Outward flow impulse turbine |
| D. | Inward flow impulse turbine |
| E. | None of the above |
| Answer» A. Outward flow reaction turbine | |
| 104. |
Kinematic similarity between model and prototype means |
| A. | Vitrified clay. |
| B. | The similarity of shape |
| C. | The similarity of discharge |
| D. | The similarity of forces |
| E. | The similarity of motion |
| Answer» D. The similarity of forces | |
| 105. |
In order to keep out debris and other materials carried by water which are likely to damage turbine, provision is made by |
| A. | Ensign valve |
| B. | Jet flow gates |
| C. | Trash racks |
| D. | Radial gates |
| E. | Trunions |
| Answer» C. Trash racks | |
| 106. |
The thickness of laminar boundary layer at a distance x from the leading edge over a flat plate varies as |
| A. | x1/2 |
| B. | x3/5 |
| C. | x2 |
| D. | x |
| E. | x4/5 |
| Answer» A. x1/2 | |
| 107. |
Anchor blocks are provided to hold the pipe line so as to |
| A. | Prevent the pipe line sliding down the hill |
| B. | Control the direction of expansion |
| C. | Resist the unbalanced hydrostatic forces at a change of direction of the pipe line |
| D. | Prevent movement of the pipe line on account of vibration or water hammer pressures |
| E. | All of the above |
| Answer» E. All of the above | |
| 108. |
The magnitude of water hammer depends on |
| A. | The length of pipeline |
| B. | The speed at which the valve is closed |
| C. | To elastic properties of the liquid flowing through the pipe |
| D. | The elastic properties of the pipe material |
| E. | All of the above |
| Answer» E. All of the above | |
| 109. |
When the relationship between Reynolds number and the friction factor is represented by a straight line the flow is said to be |
| A. | laminar flow |
| B. | vortex flow |
| D. | turbulent flow |
| E. | isentropic flow |
| Answer» A. laminar flow | |
| 110. |
Buoyant force is |
| A. | The resultant force on a body due to the fluid surrounding it |
| B. | A non-vertical force on symmetrical bodies |
| C. | Equal to the volume of liquid displaced |
| D. | The resultant force acting on a floating body |
| E. | The force necessary to maintain equilibrium of a submerged body |
| Answer» A. The resultant force on a body due to the fluid surrounding it | |
| 111. |
The hydraulic radius is given by |
| A. | Wetted perimeter divided by area |
| B. | Square root of area |
| C. | Area divided by wetted perimeter |
| D. | Area divided by square of wetted perimeter |
| E. | None of these answers |
| Answer» C. Area divided by wetted perimeter | |
| 112. |
Mouthpieces are used to measure |
| A. | pressure |
| B. | rate of flow |
| C. | frictionless |
| D. | viscosity |
| E. | velocity |
| Answer» B. rate of flow | |
| 113. |
In Red wood viscometer |
| A. | Absolute value of viscosity is determined |
| B. | The fluid discharges through orifice with negligible velocity |
| C. | Comparison of viscosity is done |
| D. | Part of the head of fluid is utilised in overcoming friction |
| E. | The fluid should rapidly flow out of the orifice |
| Answer» C. Comparison of viscosity is done | |
| 114. |
Steady flow occurs when |
| A. | There are no obstructions on the path of flow |
| B. | Conditions do not change withtime at any point |
| C. | The velocity does not change |
| D. | The pressure does not change along the flow |
| E. | Conditions change gradually with time |
| Answer» B. Conditions do not change withtime at any point | |
| 115. |
As the temperature increases, the viscosity of a gas |
| B. | increases, increases |
| C. | decreases, decreases |
| D. | increases, decreases |
| E. | decreases, increases |
| Answer» D. increases, decreases | |
| 116. |
A cylinder is kept on a horizontal boundary past which an ideal fluid flows perpendicular to cylinder axis. It will then experience |
| A. | Lift force in vertically downward direction |
| B. | No lift force |
| C. | Some lift force |
| D. | Lift force depends on velocity of flow and mass of cylinder and its contents |
| E. | Lift force in vertically upward direction |
| Answer» B. No lift force | |
| 117. |
Which one of the following is not a disadvantage due to a Buttress dam? |
| A. | Problems arising out of large number of joints in the dam |
| B. | Significance of volume changes of thin members |
| C. | The structure being self-sealing, it is not sensitive to accidental rise in water level above the designed full supply level |
| D. | Bearing stress of the foundtions are higher |
| E. | Overflow arrangements |
| Answer» C. The structure being self-sealing, it is not sensitive to accidental rise in water level above the designed full supply level | |
| 118. |
The pressure inside a 4 cm dia hose is 700 kPa. If the water exits through 1 2 cm dia. Nozzle what velocity in m/s can be expected inside the hose? |
| A. | 10.5 |
| B. | 9.7 |
| C. | 16.3 |
| D. | 20.4 |
| E. | 12.4 |
| Answer» B. 9.7 | |
| 119. |
Which of the following is the result of the formation of a region of low pressure developed on the downstream side due to separation of flow? |
| A. | Vortex street |
| B. | Wakes |
| C. | Cavities |
| E. | Holes |
| Answer» B. Wakes | |
| 120. |
Force on a flat stationary plate is |
| A. | Velocity of jet before impact - velocity after impact |
| B. | Difference in velocities of jet in the direction normal to plate |
| C. | Mass of water x (difference in velocities of jet) |
| D. | Mass of striking water x (velocity before impact in the direction normal to plate-velocity fter impact in the direction normal to plate). |
| E. | None of the above |
| Answer» D. Mass of striking water x (velocity before impact in the direction normal to plate-velocity fter impact in the direction normal to plate). | |
| 121. |
Viscosity will be the most important property in which of the following case |
| A. | Travel of a bullet through air |
| B. | Formation of soap bubbles |
| C. | Flow of castor oil through a pipe. |
| D. | Water jet issuing from a fire hose |
| E. | 1.25 |
| Answer» C. Flow of castor oil through a pipe. | |
| 122. |
The flow of a fluid in a pipe takes place from |
| A. | higher level to lower level |
| B. | small end to large end |
| C. | higher energy to lower energy |
| D. | higher pressure to lower pressure |
| E. | lower pressure to higher pressure |
| Answer» C. higher energy to lower energy | |
| 123. |
The head over a 90? V-notch weir increases from 0.15 m to 0.3 m. The ratio of the new discharge to the original discharge is |
| A. | 1.25 |
| B. | 4 |
| C. | 5.657 |
| D. | 2 |
| E. | 1.414 |
| Answer» C. 5.657 | |
| 124. |
The portion of the power canal which extends from the power house to the recepient water course, is known as |
| A. | Tail race |
| B. | Discharge channel |
| C. | Exhaust |
| D. | Tail surge channel |
| E. | None of the above |
| Answer» A. Tail race | |
| 125. |
Nagarjuna Sugar dam has been constucted on river |
| A. | Mabanadi |
| B. | Cauvery |
| C. | Krishna |
| D. | Kali |
| E. | Periyar |
| Answer» C. Krishna | |
| 126. |
Which is higher head |
| A. | 33 inch Hg |
| B. | 31.6 ft water |
| C. | 14.1 psi |
| D. | 1.013 kg/cm2 |
| E. | 75.6 cm of Hg |
| Answer» A. 33 inch Hg | |
| 127. |
The specific speed for axial flow turbine varies from |
| A. | 0 - 45 |
| B. | 10 - 100 |
| C. | 80 - 200 |
| D. | 200 - 300 |
| E. | None of the above |
| Answer» C. 80 - 200 | |
| 128. |
1 Kilo-Pascal is the same as |
| A. | 1000 N/cm2 |
| B. | 1000 N/m2 |
| D. | 1000 n/mm2 |
| E. | 1000 N/cm |
| Answer» B. 1000 N/m2 | |
| 129. |
When a liquid rotates at a angular velocity above a vertical axis as a rigid body, the pressure intensity varies |
| A. | inversely with radial distance |
| B. | directly with radial distance |
| C. | More than 20? |
| D. | Directly with square of the radial distance |
| E. | inversely with the square of radial distance |
| Answer» D. Directly with square of the radial distance | |
| 130. |
Specific speed (fps) = k x specific speed (metric where value of k is (for turbines) |
| A. | 8.91 |
| B. | 1 |
| C. | 4.45 |
| D. | 2 |
| E. | 9.81 |
| Answer» C. 4.45 | |
| 131. |
Water at 20? C will rise, in a clean 1 mm dia. Glass tube, a distance, in cm, of |
| A. | 3 |
| B. | 5 |
| C. | 1 |
| D. | 4 |
| E. | 2 |
| Answer» A. 3 | |
| 132. |
Viscosity will be the most important property in which of the following case |
| B. | Formation of soap bubbles |
| C. | Water jet issuing from a fire hose |
| D. | Flow of castor oil through a tube |
| E. | Travel of a bullet through air |
| Answer» D. Flow of castor oil through a tube | |
| 133. |
When the shear stress acting on a fluid is removed |
| A. | the body regains its original shape and position immediately |
| B. | the body regains its original shape and position slowly |
| C. | the body regains its original shape but remains in the new position |
| D. | the body retains its new shape and position |
| Answer» D. the body retains its new shape and position | |
| 134. |
Which mouthpiece is having maximum coefficient of discharge? |
| A. | External mouthpiece |
| B. | Convergent-Divergent mothpiece |
| C. | Internal mouthpiece |
| D. | None of the above |
| E. | None of the above |
| Answer» B. Convergent-Divergent mothpiece | |
| 135. |
Under which two of the following regimes would the assumption of a continuum be reasonable (1) Free molecule flow (2) Gas dynamics (3) Slip flow (4) Complete vacuum (5) Liquid flow |
| A. | 3,5 |
| B. | 1,5. |
| C. | 1,2 |
| D. | 2,3 |
| E. | 1,4 |
| Answer» A. 3,5 | |
| 136. |
Drag force is not a function of |
| A. | 1.25 |
| B. | projected area of the body |
| C. | velocity of the body |
| D. | mass density of the fluid |
| E. | mass density of the body |
| Answer» E. mass density of the body | |
| 137. |
The shear stress velocity gradient relation of the Newtonian fluids is |
| A. | There is no such relation |
| B. | Hyperbolic |
| C. | Linear |
| D. | Involutic |
| E. | Parabolic |
| Answer» C. Linear | |
| 138. |
A hydrometer is used to determine |
| A. | Specific gravity of liquids |
| B. | Buoyancy force |
| C. | Viscosity of liquids |
| D. | Surface tension |
| E. | Relative humidity |
| Answer» A. Specific gravity of liquids | |
| 139. |
Ogee is |
| A. | overfall of a spillway in the shape of double or S-curve which is convex at the top and concave at the bottom |
| B. | the channel between the silt extractor and the river through which the escapage water is discharged |
| C. | the channel conducting water away from a water wheel |
| D. | none of the above |
| Answer» A. overfall of a spillway in the shape of double or S-curve which is convex at the top and concave at the bottom | |
| 140. |
A piece of metal of specific gravity 3.4 floats in mercury of specific gravity 13.6. What fraction of its volume is under mercury |
| A. | 0.75 |
| B. | Full |
| C. | 0.25 |
| D. | 0.5 |
| E. | 0.9 |
| Answer» B. Full | |
| 141. |
An ideal fluid is |
| A. | Frictionless and incompressible |
| B. | One which obeys Newton's law of viscosity |
| C. | Very viscous |
| D. | A useful assumption in problems in conduit flow |
| E. | None of these answers |
| Answer» A. Frictionless and incompressible | |
| 142. |
The parameters with determine the friction factor of turbulent flow in a rough pipe are |
| A. | expands until it fills its space |
| B. | Mach number and relative roughness |
| C. | Reynolds number and relative roughness |
| D. | Froude number and relative roughness |
| E. | Froude number and Mach number |
| Answer» C. Reynolds number and relative roughness | |
| 143. |
The lowest portion of storage basin from where the water is not drawn usually, is |
| A. | Reserve storage |
| B. | Dead storage |
| C. | Bottom storage |
| D. | Spring reserve |
| E. | Sub-soil storage |
| Answer» B. Dead storage | |
| 144. |
If the specific speed of a turbine is 800 the turbine should be |
| A. | Kaplan |
| B. | Pelton wheel |
| C. | Girard |
| D. | Fourneyron |
| E. | Francis |
| Answer» A. Kaplan | |
| 145. |
Relative velocity is |
| A. | Sum of two velocities |
| B. | Average velocity |
| C. | The difference between two velocities |
| D. | Vector difference of two velocities |
| E. | The difference between the higher velocity and average velocity |
| Answer» D. Vector difference of two velocities | |
| 146. |
As the temperature decreases, the viscosity of a gas |
| A. | 2.45 |
| B. | increases, increases |
| C. | decreases, decreases |
| D. | increases, decreases |
| E. | decreases, increases |
| Answer» E. decreases, increases | |
| 147. |
The horizontal to vertical side slope in case of Cpppoletti weir is |
| A. | I : I |
| B. | 1 : ?2 |
| C. | I : 4 |
| D. | 4 : I |
| E. | I : 2 |
| Answer» C. I : 4 | |
| 148. |
In case of Constant Angle Arch Dam, the most favourable central angle is |
| A. | 170? |
| B. | 90? |
| C. | 165? |
| D. | 133? |
| E. | 73? |
| Answer» D. 133? | |
| 149. |
A trapezoidal weir of horizontal crest with side slopes of one horizontal to four vertical is called |
| A. | trapezoidal weir |
| B. | cippoletti weir |
| C. | sultro weir |
| D. | None of the above |
| Answer» B. cippoletti weir | |
| 150. |
Which two forces are most important in laminar flow between closely parallel plates? |
| B. | Gravity and pressure |
| C. | Viscous and pressure |
| D. | Inertial and viscous |
| E. | Pressure and inertial |
| Answer» C. Viscous and pressure | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.